From Nanowires to Nanotubes

The researchers took advantage of the Kirkendall effect, which occurs during inter-diffusion between two solids. They used the effect to take nanowires of a certain chemical composition in the core and the shell, and produce nanotubes of a more complex composition. The scientists showed that this method can also be used to efficiently produce nanowires themselves (Nature Materials, August 2006).

Compound nanotubes can be produced in various ways: rolling up layered materials, coating pores in templates, or eliminating the core of a core-shell nanowire. In the case of ternary compound nanotubes, most of these methods have limitations. They may need layered materials or templates (e.g., porous alumina). Or the nanotubes produced may have an insufficiently small aspect ratio. Frequently the crystallinity of the nanotubes produced is poor - that is, they consist of many grains that have different crystallographic orientations.

Scientists at the Max Planck Institute of Microstructure Physics in Halle, Germany, have devised a generic technique for generating nanotubes with very good crystallinity of a ternary compound (i.e., a compound that consists of three different chemical elements).

The scientists fabricated ultra-long single-crystalline ZnAl2O₄ spinel nanotubes (total diameter: ~ 40 nm, wall thickness: ~10 nm). Spinels are ternary compounds of type AB2O₄ that crystallise in a specific cubic structure. Nanotube formation is based on an interfacial solid-state reaction of core-shell ZnO-Al2O₃ nanowires involving the Kirkendall effect.

This effect arises when the interdiffusion between two solids is realized via vacancy transport and an asymmetry of the related diffusion rates occurs which finally results in the formation of pores. The researchers have used this effect to produce hollow nanowires, i.e. nanotubes. The latter grow due to the fact that the generated pores cannot leave the nanowires, which is a consequence of the spatial confinement given by the specific reaction geometry involving cylindrical symmetry.

The method has a number of advantages. For example, the required voids need not be produced beforehand. This, in the end, allows scientists to fabricate three-dimensional nanostructures of complex shape. In addition, nanotubes with large aspect ratios can be obtained, and the method can be scaled up to produce large volume quantities useful for applications. Moreover, ZnO (part of medical salves) is very biocompatible. Finally, the method can be applied to many other types of ZnO- or MgO-based spinel nanostructures with adopted chemical composition and interesting properties.

Citation: H.J. Fan, M. Knez, R. Scholz, K. Nielsch, E. Pippel, D. Hesse, M. Zacharias; U. Gösele, Monocrystalline spinel nanotube fabrication based on the Kirkendal effect. Nature Materials 5 (2006) 627

Source: Max-Planck-Institute of Microstructure Physics

Nanowires may boost solar cell efficiency, engineers say
University of California, San Diego electrical engineers have created experimental solar cells spiked with nanowires that could lead to highly efficient thin-film solar cells of the future.
New theory explains enhanced superconductivity in nanowires
Superconducting wires are used in magnetic resonance imaging machines, high-speed magnetic-levitation trains, and in sensitive devices that detect variations in the magnetic field of a brain. Eventually, ultra-narrow superconducting wires might be used in power lines designed to carry electrical energy long distances with little loss.
New instrument probes nanostructure growth for industry and research
Researchers at Purdue University are using a rare type of electron microscope to see how structures like carbon nanotubes form at the atomic level, information that will be crucial for nanotechnology to find practical applications in computing, electronics and other areas.
Nano World: Superior nanowire transistors
Transistors made with semiconductor wires just nanometers or billionths of a meter wide can exceed the performance of current state-of-the-art silicon transistors by three or four times, experts tell UPI's Nano World.
Researchers Achieve First Electrowetting of Carbon Nanotubes
If you can imagine the straw in your soda can being a million times smaller and made of carbon, you pretty much have a mental picture of a carbon nanotube. Scientists have been making them at will for years, but have never gotten the nanotubes to suck up liquid metal to form tiny wires. In fact, conventional wisdom and hundreds of refereed papers say that such is not even possible.
Like the Famous Doughboy, Nanotubes Give When Poked
Smaller, faster computers, bullet proof t-shirts and itty-bitty robots, such are the promises of nanotechnology and the cylinder-shaped collection of carbon molecules known as nanotubes. But in order for these exciting technologies to hit the marketplace (who wouldn’t want an itty-bitty robot), scientists must understand how these miracle-molecules perform under all sorts of conditions. For, without nanoscience, there would be no nanotechnology.
Harnessing microbes, one by one, to build a better nanoworld
Taking a new approach to the painstaking assembly of nanometer-sized machines, a team of scientists at UW-Madison has successfully used single bacterial cells to make tiny bio-electronic circuits.
The work is important because it has the potential to make building the atomic-scale machines of the nanotechnologist far easier. It also may be the basis for a new class of biological sensors capable of near-instantaneous detection of dangerous biological agents such as anthrax.
Scientists create DNA tubes with programmable sizes for nanoscale manufacturing
Scientists at the California Institute of Technology (Caltech) have developed a simple process for mass producing molecular tubes of identical--and precisely programmable--circumferences. The technological feat may allow the use of the molecular tubes in a number of nanotechnology applications.

From Nanowires to Nanotubes

Related stories:

News discussion: