New 'Liquid Lens' Data for Immersion Lithography

New data on the properties of potential "liquid lenses" compiled by the National Institute of Standards and Technology (NIST) could help the semiconductor industry continue to shrink feature sizes on computer chips.

In a paper published in the March 10, 2006 issue of Applied Optics,* NIST researchers present newly measured values for key properties of organic solvents and inorganic solutions that might be useful in immersion lithography. Little more than an idea three years ago, immersion lithography is already being commercialized, thanks in part to previously published NIST data.

The technique uses liquids to sharpen the focus of patterns used in "printing" semiconductor circuits, much like the eye uses a liquid center to help form images on the retina. Prototype commercial systems use water between the last lens element and the circuit's silicon wafer base, to focus 193-nanometer wavelengths of light down to circuit feature sizes of perhaps 45 nanometers.

The liquids used for immersion lithography must have a high refractive index—the higher the better—which affects how light bends as it crosses interfaces. NIST previously published data on the refractive index of water, which is almost 50 percent higher than that of air. "When we started this work two years ago, you couldn't even find adequate data on water," says Simon Kaplan, lead author of the new paper.

Several companies have proposed proprietary high-index immersion liquids. The NIST work, by contrast, is a fully public report of the key optical properties of a range of fluids. The survey indicates useful trends, such as the fact that refractive index increases with molecular size, and includes data on the effect of temperature on the refractive index, which is crucial in maintaining a sharp focus during the printing process. The data may help other researchers identify useful liquids or calibrate their own measurements.

* S.G. Kaplan and J.H. Burnett. 2006. Optical properties of fluids for 248 nm and 193 nm immersion photolithography. Applied Optics. Posted online March 10.

Source: NIST

Related stories:

Longer is Better for Nanotube Optical Properties
If you want to exploit the ability of single-walled carbon nanotubes (SWCNTs) to absorb, fluoresce and scatter light, take the advice of a sandlot quarterback and “go long.”
New Infrared Tool Measures Silicon Wafer Thickness
In the last few years, semiconductor circuit features have shrunk to sub-100 nanometer dimensions, while the size of the thin silicon wafers that these circuits are constructed on has grown from 200 millimeters (mm) to 300 mm (about 12 inches). The payoff is a higher yield of finished devices from fewer wafers.
NIST WTC 7 Investigation Finds Building Fires Caused Collapse
The fall of the 47-story World Trade Center building 7 (WTC 7) in New York City late in the afternoon of Sept. 11, 2001, was primarily due to fires, the Commerce Department’s National Institute of Standards and Technology (NIST) announced today following an extensive, three-year scientific and technical building and fire safety investigation. This was the first known instance of fire causing the total collapse of a tall building, the agency stated as it released for public comment its WTC investigation report and 13 recommendations for improving building and fire safety.
Candy-coating keeps proteins sweet
Sugar-frosting isn’t just for livening up boring bran flakes; it can also preserve important therapeutic proteins. Researchers at the National Institute of Standards and Technology have developed a fast, inexpensive and effective method for evaluating the sugars pharmaceutical companies use to stabilize protein-drugs for storage at room temperature. The group presented their findings at the 236th American Chemical Society National Meeting and Exposition.
Light touch: Controlling the behavior of quantum dots
Researchers from the National Institute of Standards and Technology and the Joint Quantum Institute (JQI), a collaborative center of the University of Maryland and NIST, have reported a new way to fine-tune the light coming from quantum dots by manipulating them with pairs of lasers. Their technique, published in Physical Review Letters, could significantly improve quantum dots as a source of pairs of “entangled” photons, a property with important applications in quantum information technologies.
Vegas 'Quantum Spookshow' Demos On-the-Fly Encryption of Streaming Video
Las Vegas shows often are on the cutting edge. Following this tradition, researchers from the National Institute of Standards and Technology (NIST) and their colleagues at the National University of Singapore (NUS) have landed gigs this week at Caesar's Palace and the Riviera Hotel and Casino to perform live demonstrations of quantum cryptography, theoretically the most secure form of encryption.
Skipping Atomic-scale Stones to Study Some Chemistry Basics
Thought experiment: a carbon dioxide molecule—think of a cheerleader’s baton—comes slanting in at high speed over a dense liquid, strikes the surface and ricochets. How does it tumble? Fast or slow? Forward, backward or sideways? These are not idle questions because simple events like the tumbling molecule go to the heart of the chemistry and physics of gas-liquid interactions. These cover a broad swath of important chemical processes—including breathing—for which details of the encounter are just coming into view.
Improved Reaction Data Heat Up the Biofuels Harvest
High food prices, concern over dwindling supplies of fossil fuels and the desire for clean, renewable energy have led many to seek ways to make ethanol out of cellulosic sources such as wood, hay and switchgrass. But today’s processes are notoriously inefficient.

News discussion:

Physics news