On Monday afternoon, June 9, researchers in a laboratory room at the Commerce Department's National Institute of Standards and Technology (NIST) campus in Boulder, Colorado discovered that a vial holding about 1/4 of a gram of a plutonium-containing powder had cracked and that some particles had spilled from the vial. The laboratory room and an adjacent lab in NIST's Building 1 were immediately sealed off.
Twenty-two NIST staff and associates who had been working in or near the lab were asked to remain in the immediate area until they could be carefully monitored and any radioactive materials on their clothing or bodies removed.
Trace contamination was found on the soles of the shoes or on a few articles of clothing for most of the 22 personnel. In most cases, the trace contamination was easily removed using soapy water following standard health physics practices, and 20 personnel were sent home contaminant-free. Two staff members who had worked directly with the material had trace contamination on their hands and began the standard health physics practice of carefully washing their hands to remove the contamination.
NIST health safety personnel supervised the careful testing of nearby hallways and adjacent labs and offices. Some areas of trace contamination were found in the nearby hallways and in a small office area at the end of a hallway. These areas were cleaned and retested to ensure they were contamination free. There was no evidence of any contamination outside of the immediate area or in the doorways leading out of the building.
The affected laboratory room and the adjacent connecting laboratory room were sealed off for further testing, along with the nearby men's room. These areas will be fully assessed and cleaned as required. Air sampling in the affected laboratory room shows no evidence of airborne plutonium particles. There is no evidence that any radioactive materials left the affected laboratory, apart from the trace contaminants in nearby areas and on the affected personnel, and all those traces have been thoroughly cleaned and the areas retested, showing no radiation above normal background levels.
Plutonium is a radiation-emitting element, and the research sample involved is a certified reference material with very precisely known radiation activity levels. The affected NIST employees and associates are being carefully monitored to quantify any potential individual exposure from the plutonium. Based on continuing test results, appropriate actions will be taken if necessary.
The small plutonium sample (smaller than a dime in size) was being used in a research project to develop improved radiation detectors for use by nuclear inspectors outside NIST. The Nuclear Regulatory Commission has been advised about the incident. NIST is conducting a thorough investigation to gather facts about how the incident occurred and to determine what, if anything, may be done to prevent any similar situations in the future.
Source: NIST
Related stories:
Scientists peel away the mystery behind gold's catalytic prowess
Few materials have exercised as much of a hold on the human imagination, or on human history, as has gold. But for all of its popular uses – money, medals, jewelry and more – gold's potential as a catalyst lay hidden until the 1980s, when Masatake Haruta and Graham Hutchings independently discovered that gold, which had long been considered inactive, could be an extraordinarily good catalyst. Haruta demonstrated the low-temperature oxidation of CO and Hutchings the hydrochlorination of acetylene to vinyl chloride.
Record-breaking detector may aid nuclear inspections
Scientists at the Commerce Department's National Institute of Standards and Technology (NIST) have designed and demonstrated the world's most accurate gamma ray detector, which is expected to be useful eventually in verifying inventories of nuclear materials and detecting radioactive contamination in the environment.
NIST improves accuracy of 'watt balance' method for defining the kilogram
A leading experimental method for defining the kilogram in terms of properties of nature is now more accurate than ever, scientists at the Commerce Department's National Institute of Standards and Technology reported today. The advance may move the scientific community closer to redefining the kilogram, the only one of the seven basic units of the international measurement system still defined by a physical artifact.
Replace Kilogram Artifact Now With Definition Based on Nature, Experts Say
It’s time to replace the 115-year-old kilogram artifact as the world's official standard for mass, even though experiments generally thought necessary to achieve this goal have not yet reached their targeted level of precision, according to an upcoming Metrologia journal article* authored by five eminent scientists from the United States, United Kingdom and France that is being discussed during a scientific meeting** beginning at the Royal Society of London.
New Sensor Could Help Avert Pipeline Failures
(PhysOrg.com) -- Researchers at the National Institute of Standards and Technology (NIST) and Colorado School of Mines (CSM) have developed a prototype sensor that quickly detects very small amounts of hydrogen accumulation in coated pipeline steel. The new sensor could provide early warning of pipes that have accumulated excessive amounts of hydrogen -- a notorious source of embrittlement—and avert potentially disastrous failures of pipelines carrying hydrogen fuel.
Team studies how new helium ion microscope measures up
Just as test pilots push planes to explore their limits, researchers at the National Institute of Standards and Technology are probing the newest microscope technology to further improve measurement accuracy at the nanoscale. Better nanoscale measurements are critical for setting standards and improving production in the semiconductor and nanomanufacturing industries.
Improved Reaction Data Heat Up the Biofuels Harvest
High food prices, concern over dwindling supplies of fossil fuels and the desire for clean, renewable energy have led many to seek ways to make ethanol out of cellulosic sources such as wood, hay and switchgrass. But today’s processes are notoriously inefficient.
NIST Trumps the Clumps: Making Biologic Drugs Safer
Scientists at the National Institute of Standards and Technology have developed a technique to measure the formation of clumps of proteins in protein-based pharmaceuticals. This first systematic study clarifies the conditions under which scientists can be assured that their instruments are faithfully measuring the formation of protein aggregates, a major concern because of its impact on quality control and safety in biologic drug manufacturing.