A n improved method for depositing nanoporous, conducting polymer films on miniaturized device features has been demonstrated by researchers at the National Institute of Standards and Technology (NIST).
Described in the April 6 issue of the Journal of the American Chemical Society,* the method may be useful as a general technique for reproducibly fabricating microdevices such as sensors for detecting toxic chemicals.
These colorized scanning electron micrographs show a portion of the NIST microheater device before (left) and after (right) application of the sponge-like polyaniline coating.
Unlike most polymers, conducting polymers have the electrical and optical properties of metals or semiconductors. These materials are of increasing interest in microelectronics because they are inexpensive, flexible and easy to synthesize.
Polyaniline is a particularly promising conducting polymer for microelectronics applications, but it is difficult to process because it doesn't dissolve in most solvents. NIST researchers have circumvented this problem by dispersing nanoscale particles of polyaniline into a mild solvent.
"The beauty of the method,” says NIST guest researcher Guofeng Li, “is that the polyaniline chain carries a natural positive charge.” Once the particles are formed, electrostatic repulsion prevents them from clumping together. Moreover, the positively charged particles then can be manipulated and patterned on complex device structures by applying an electrical field.
The process produces a sponge-like coating that efficiently captures gaseous molecules. So far NIST researchers have demonstrated that such coatings can detect the difference between methanol and water vapor. Additional tests will be needed before the polymer devices could be used for detecting toxic gases.
NIST holds patents for previous work using microheaters coated with nanostructured tin oxide films. As the microheaters cycle through a series of temperatures, changes in electrical resistance are used to detect toxic gases at part per billion levels. Ultimately, NIST researchers hope to develop inexpensive arrays of microheater sensors coated with both polymer and inorganic oxide films optimized to identify the components of gas mixtures.
*G. Li, C. Martinez, S. Semancik. Controlled electrophorectic patterning of polyaniline from a colloidal suspension. Journal of the American Chemical Society, April 6, 2005.
Source: NIST
Related stories:
Public Invited to See Nanosoccer Robots in Action in Pittsburgh
Nanosoccer returns to the field later this month, when the National Institute of Standards and Technology hosts for the second time the world’s most Lilliputian sport. Three student teams will participate in a public exhibition at the 2008 U.S. “RoboCup Open” in Pittsburgh, Pa., May 25 to 27, where miniature “soccer players”—computer-driven robots six times smaller than an amoeba operating on a field the size of a grain of rice—will show off their skills.
New 3-D Test Method for Biomaterials 'Flat Out' Faster
A novel, three-dimensional (3-D) screening method for analyzing interactions between cells and new biomaterials could cut initial search times by more than half, researchers from the National Institute of Standards and Technology (NIST) and Rutgers University report in the new issue of
Advanced Materials.
Copolymers block out new approaches to microelectronics at NIST
In response to the electronics industry’s rallying cry of “smaller and faster,” the next breakthroughs in the electronics size barrier are likely to come from microchips and data storage devices created out of novel materials such as organic molecules and polymers.
Probing the mysteries of a surprisingly tough hydrogel
Some 46 million people suffer from arthritis in the United States alone. The worst cases require painful surgeries to drill holes in and reinforce joints. Now researchers working at the National Institute of Standards and Technology are studying an unusually pliant yet strong synthetic cartilage replacement in hopes of providing arthritis victims with some relief.
Directed self-ordering of organic molecules for electronic devices
A simple surface treatment technique demonstrated by a collaboration between researchers at the National Institute of Standards and Technology, Penn State and the University of Kentucky potentially offers a low-cost way to mass produce large arrays of organic electronic transistors on polymer sheets for a wide range of applications including flexible displays, “intelligent paper” and flexible sheets of biosensor arrays for field diagnostics.
Shear Ingenuity: Tweaking the Conductivity of Nanotube Composites
One of the immediate applications of carbon nanotubes (CNT) is as an additive to polymers to create electrically conducting plastics—a relatively low CNT concentration can dramatically change the polymer‘s electrical conductivity by orders of magnitude, from an insulator to a conductor.
Videos Extract Mechanical Properties of Liquid-Gel Interfaces
Blood coursing through vessels, lubricated cartilage sliding against joints, ink jets splashing on paper—living and nonliving things abound with fluids meeting solids. However important these liquid/solid boundaries may be, conventional methods cannot measure basic mechanical properties of these interfaces in their natural environments. Now, researchers at the National Institute of Standards and Technology and the University of Minnesota have demonstrated a video method that eventually may be able to make measurements on these types of biological and industrial systems.
New paper reveals nanoscale details of photolithography process
Scientists at the National Institute of Standards and Technology have made the first direct measurements of the infinitesimal expansion and collapse of thin polymer films used in the manufacture of advanced semiconductor devices. It’s a matter of only a couple of nanometers, but it can be enough to affect the performance of next-generation chip manufacturing. The NIST measurements, detailed in a new paper, offer a new insight into the complex chemistry that enables the mass production of powerful new integrated circuits.
