New technique for nondestructive testing research

Technique uses vibration, heat detection to evaluate composite materials

Ed Henneke, associate dean for research, and graduate studies in the College of Engineering at Virginia Tech, received the Award for Innovation in Nondestructive Testing Research at the American Society for Nondestructive Testing's 14th Annual Research Symposium in Albuquerque, N.M. This award was established to recognize highly distinguished individual achievements in research in nondestructive testing.
Henneke received this award for having proposed and developed a new technique for nondestructive evaluation of damage in advanced composite materials. He and his graduate students coined a word to name this new technique -- vibrothermography.

The technique is performed by applying low amplitude, high frequency mechanical vibrations (in the range of 15,000 – 30,000 cycles per second, just beyond normal human hearing) to composite materials and then using thermography to map temperature patterns that develop on the surface of the examined material. Thermography is the mapping of isothermal contour lines (points of equal temperature) on the surface of the material.

Henneke's research group found that hot spots developed on the surface of the material above regions of damage inside the material at specific frequencies. These hot spots became hot at mechanical frequencies that could be related to the size of the damage area inside the material using a mathematical/physical model developed by the research group. The internal damage was not detectable by the human eye. Detection and analysis of such damage is important in the understanding of the ability of the material object to carry loads and not to fail catastrophically. Catastrophic failure can be responsible for economic loss or the loss of human lives.

The vibrothermography technique was developed at Virginia Tech in the Department of Engineering Science and Mechanics (ESM) in cooperation with Henneke's graduate students: Thomas S. Jones (MS, 1977), Samuel S. Russell (PhD, 1982), Shiang-Shin Lin (PhD, 1987) and Lazarus Tanek (MS, 1991). Henneke's students have since gone on to other successful ventures. Jones is presently working with Howmet Castings Corporation in nondestructive testing. Russell works for the NASA Huntsville Center applying nondestructive testing to problems of interest to NASA. Lin has returned to Taiwan and Tanek is presently a practicing civil engineer in Greece.

Throughout his career, Henneke has maintained a strong interest in his chosen research specialty of nondestructive testing. His studies have resulted in 11 books or chapters in books, 74 refereed technical papers in journals and periodicals, 91 technical reports and 157 technical lectures in both the US and Europe. His scholarly accomplishments in the field of vibrothermometry are recorded in the Encyclopedia of Materials Science and Engineering.

Henneke has been a member of the Virginia Tech faculty for 33 years, beginning as an assistant professor in 1971 and becoming a professor in 1978. He received his bachelor's and master's degrees in engineering science from the Johns Hopkins University in 1963 and 1966, respectively, as well as his Ph.D. in 1968.

Source: Virginia Tech

Related stories:

Cold atoms could replace hot gallium in focused ion beams
(PhysOrg.com) -- Scientists at the National Institute of Standards and Technology have developed a radical new method of focusing a stream of ions into a point as small as one nanometer. Because of the versatility of their approach—it can be used with a wide range of ions tailored to the task at hand—it is expected to have broad application in nanotechnology both for carving smaller features on semiconductors than now are possible and for nondestructive imaging of nanoscale structures with finer resolution than currently possible with electron microscopes.
Circuit board materials may like it hot (or not)
Electrical circuits may act differently in Arizona than they do in Alaska--potentially affecting the performance of computers and other electronics. A new technique identifies and quantifies an important cause of this temperature sensitivity.
New sensor detects chemical, biological, nuclear and explosive materials
Engineers at the U.S. Department of Energy's Argonne National Laboratory, using an emerging sensing technology, have developed a suite of sensors for national security applications that can quickly and effectively detect chemical, biological, nuclear and explosive materials.
New Sensor Could Help Avert Pipeline Failures
(PhysOrg.com) -- Researchers at the National Institute of Standards and Technology (NIST) and Colorado School of Mines (CSM) have developed a prototype sensor that quickly detects very small amounts of hydrogen accumulation in coated pipeline steel. The new sensor could provide early warning of pipes that have accumulated excessive amounts of hydrogen -- a notorious source of embrittlement—and avert potentially disastrous failures of pipelines carrying hydrogen fuel.
Toothpick: New molecular tag IDs bone and tooth minerals
Enlisting an army of plant viruses to their cause, materials researchers at the National Institute of Standards and Technology have identified a small biomolecule that binds specifically to one of the key crystal structures of the body—the calcium compound that is the basic building block of teeth and bone. With refinements, the researchers say, the new molecule can be a highly discriminating probe for a wide range of diagnostic and therapeutic applications related to bones and teeth.
Geologists recover rocks yielding unprecedented insights into San Andreas Fault
For the first time, geologists have extracted intact rock samples from 2 miles beneath the surface of the San Andreas Fault, the infamous rupture that runs 800 miles along the length of California.
Sensors may monitor aircraft for defects continuously
Networks of sensors mounted on commercial aircraft might one day check continuously for the formation of structural defects, possibly reducing or eliminating scheduled aircraft inspections.
Handheld device 'sees' damage in concrete bridges, piers
Engineers at MIT have developed a new technique for detecting damage in concrete bridges and piers that could increase the safety of aging infrastructure by allowing easier, more frequent, onsite inspections that don't interfere with traffic or service.

News discussion:

Physics news