Rigiflex lithography improves organic LEDs

In the race to create the roll-up TV (and a host of other devices), scientists are continually manipulating organic light-emitting diode (OLED) technology. Recently, researchers from Korea have designed a technique that is rigid enough to allow extremely high resolution and flexible enough to cover a large area in a simple process.

Because OLED technology is one of the newer methods to enter the flat panel display market, analysts initially predicted that OLED would have some catching up to do to compete with the popularity of LEDs, LCDs (liquid crystal devices) and plasma screens. However, scientists are meeting the technical challenges of OLEDs and designing technology that proves its worth in many regards: it’s brighter, faster, lighter, cheaper, bigger and smaller than other technologies in certain areas.

OLEDs, like LEDs, are electroluminescent, meaning they generate light when electrically stimulated. As opposed to LEDs that use semiconductors to enable electron-hole recombination, OLEDs use carbon-based molecules (which vary depending on desired color). However, the two most prominent OLED techniques have limitations: the pattern transfer method has color constraints, and the shadow mask method can only cover small areas.

In a recent issue of Nanotechnology, scientists Jun-ho Choi et al. present a simple and effective method for OLED displays using rigiflex lithography, a technique that members of the team introduced last year.

“While the rigid nature of the rigiflex mould allows resolution down to the sub-100 nm range, the flexible nature of the mould makes it possible for the transfer to be applied to large areas,” wrote the scientists. “A flat substrate is not necessarily flat in that there is always roughness at the nanometer scale if not the micrometer level….A flexible mould can make intimate contact with the underlying surface over a large area because of the flexibility, which makes large area applications possible.”

To enable large area applications, the method uses low pressure for the transfer of a mold made of poly (urethane acrylate) (PUA). After depositing organic multilayers on the mold, the design is transferred to a glass-coated (indium tin oxide) surface by a simple process based on the adhesion difference between the mold and the surface.

Compared with other OLED techniques, rigiflex lithography demonstrates equivalent luminance strength, but outperformed other techniques with its large size, flexibility and simplicity. The method allows a simple step-and-repeat transfer of each color (red, green and blue) OLED.

“There is no particular limit on the size in principle,” Hong Lee, coauthor, told PhysOrg.com. “With rigiflex OLED, you can 'print' the whole device in one process, whereas with other techniques, you have to do it one at a time, many times for many layers involved in the fabrication.”

Applications for OLED technology currently under investigation include "smart" light-emitting shades; video walls; and electronic displays on clothes, windshields and visors for pilots, drivers and scuba divers.

Citation: Choi, Jun-ho, Kim, Kyung-Ho, Choi, Se-Jin and Lee, Hong H. Whole device printing for full colour displays with organic light emitting diodes. Nanotechnology 17 (2006) 2246-2249.

By Lisa Zyga, Copyright 2006 PhysOrg.com

Related stories:

New OLED encapsulation method reduces water intrusion, increases lifetime
Researchers have developed an improved organic light emitting diode (OLED) sealing process to reduce moisture intrusion and improve device lifetime.
Engineers make first 'active matrix' display using nanowires
Engineers have created the first "active matrix" display using a new class of transparent transistors and circuits, a step toward realizing applications such as e-paper, flexible color monitors and "heads-up" displays in car windshields.
Simple OLEDs ready for quick manufacturing
With their attractively low energy consumption, Organic Light Emitting Diodes (OLEDs) are widely predicted to replace the LCDs now used in the large screens of laptops and TVs. Currently, OLEDs are commonly used in small portable devices such as cell phones, but adapting them to large screens will still require a few modifications.
Samsung Highlights 40'' OLED, 82'' LCD TV, Other LCD Technologies at IMID
Samsung Electronics announced that it will showcase its largest line-up of leading-edge information display technology ever exhibited in Asia - during the IMID (International Meeting on Information Display) 2005, an international information display conference and exhibition held in Seoul from July 19 to 23.
Kodak Licenses OLED Technology to Fuji Electric Holdings
Eastman Kodak Company said that Fuji Electric Holdings Co., Ltd. of Japan (Fuji) is a licensee of Kodak’s organic light emitting diode (OLED) technology, and is applying its license toward development of its own color conversion matrix (CCM) full-color OLED display technology with the intention of offering flat panel passive matrix (PM) displays.
Philips improves inkjet-printing for large-screen polymer OLED displays
Scientists at Philips have designed and built a new high-precision inkjet printer for polymer Organic Light-Emitting Diode (OLED) displays. The fully automated system uses four multi-nozzle print heads on a single common stage to accurately print the required polymer OLED layers in air, which results in a simpler process with fewer process steps and higher accuracy. The inkjet printer can handle substrates of up to 24 inch, but can easily be scaled to large substrates, demonstrating the possibility to develop a low-cost solution for making large polymer OLED displays.
Samsung SDI Develops Largest Ever Active-Matrix OLED Display
May 20, 2004 (SEOUL) -- Samsung SDI Co, Ltd of Korea, a flat-panel display affiliate of the Samsung Group, said on May 18 it has developed the world's largest active-matrix (AM) organic light-emitting diode (OLED) display based on the low-temperature polysilicon (LTPS) technology, measuring 17 inches.



This is really a technology race, just yesterday Philips and Epson also announced their prototypes OLED developments. PhysOrg reported that - http://www.physorg.com/news96.html and http://www.physorg.com/news97.html .
Philips demonstrates feasibility of PolyLED for TV applications
Full colour polymer OLED display technology on track to larger screen sizes.

Philips will demonstrate its first 13-inch PolyLED TV prototype based on polymer OLED (organic light-emitting diode) technology at the Society for Information Display's International Symposium in Seattle, USA from May 23 to 28.

News discussion:

Nanotechnology news