Printable, Flexible Carbon-Nanotube Transistors

Scientists from the University of Massachusetts Lowell and Brewer Science, Inc. have used carbon nanotubes as the basis for a high-speed thin-film transistors printed onto sheets of flexible plastic. Their method may allow large-area electronic circuits to be printed onto almost any flexible substrate at low cost and in mass quantities.

Applications for these flexible electronics include electronic paper, RFID (radio frequency identification) tags to track goods and people, and “smart skins,” which are materials and coatings containing electronic circuitry that can indicate changes in temperature or pressure, such as on aircraft or other objects.

Printing circuits onto plastic is not a new achievement. Researchers have created printed circuits at room temperature using various semi-conducting polymers as the carrier transport medium, and many, many research groups across the globe continue to work toward perfecting the process and product.

“A problem with these polymers is that they have limited carrier mobility, meaning electrons travel through them fairly slowly. This limits the speed of the devices made from them to only a few kilohertz,” said UMass Lowell Professor Xuejun Lu, the study's corresponding researcher, to PhysOrg.com.

Modern computers, by comparison, have speeds from hundreds of megahertz to more than one gigahertz.

As part of the printed-electronics effort, carbon nanotubes have been investigated as a medium for high-speed transistors, with very promising results. But one method of depositing the nanotubes onto the plastic, “growing” them with heat, requires very high temperatures, typically around 900°C, which is a major obstacle for fabricating electronic devices.

Additionally, transistors made from single carbon nanotubes or low-density nanotube films, which are produced by depositing a small amount of a nanotube solution onto a substrate, can carry only a small amount of current. High-density films (more than than 1,000 nanotubes per square micrometer, or millionth of a meter) are better, but most are not of sufficient quality, containing carbon “soot” that covers the nanotubes' sidewalls and hinders carrier flow.

To help solve these issues, Brewer Science, Inc. developed an electronic-grade carbon-nanotube solution. The researchers deposited a tiny droplet of the solution onto a plastic transparency film at room temperature using a syringe, a method similar to ink-jet printing.

“Our electronic-grade solutions contain ultrapure carbon nanotubes without using any surfactant. Our printed transistor's carrier mobility is much higher than similar devices developed by other groups, it exhibits a speed of 312 megahertz, and can carry a large current,” said Dr. Xuliang Han, Senior Research Engineer at Brewer Science.

This research is described in the November 16, 2007, online edition of Micro & Nano Letters.

Citation: Micro & Nano Letters -- December 2007 -- Volume 2, Issue 4, p. 96-98

Copyright 2007 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.

Related stories:

Mimicking gecko feet: Dry adhesive based on carbon nanotubes gets stronger
The race for the best "gecko foot" dry adhesive got a new competitor this week with a stronger and more practical material reported in the journal Science by a team of researchers from four U.S. institutions.
New material could speed development of hydrogen powered vehicles
Researchers in Greece report design of a new material that almost meets the U.S. Department of Energy (DOE) 2010 goals for hydrogen storage and could help eliminate a key roadblock to practical hydrogen-powered vehicles. Their study on a way of safely storing hydrogen, an explosive gas, is scheduled for the Oct. 8 issue of ACS' Nano Letters.
New study on properties of carbon nanotubes, water could have wide-ranging implications
A fresh discovery about the way water behaves inside carbon nanotubes could have implications in fields ranging from the function of ultra-tiny high-tech devices to scientists' understanding of biological processes, according to researchers from the University of North Carolina at Chapel Hill.
Nanoscale carbon materials research wins the 2008 Julius Springer Prize for Applied Physics
Dr. Phaedon Avouris of IBM and Professor Tony Heinz of Columbia University were presented with the 2008 Julius Springer Prize for Applied Physics on 27 September 2008 during a day-long forum at Harvard University, attended by luminaries of the field. The Julius Springer Prize for Applied Physics recognizes researchers who have made an outstanding and innovative contribution to the field of applied physics. The forum was sponsored by the scientific publisher Springer.
Breakthrough for carbon nanotube materials
(PhysOrg.com) -- In collaboration with scientists from the NanoTech Institute of the University of Texas at Dallas (UTD) – CSIRO has achieved a major breakthrough in the development of a commercially-viable manufacturing process for a range of materials made from carbon nanotubes.
Tweezers Trap Nanotubes by Color
Singled-walled carbon nanotubes are graphene sheets wrapped into tubes, and are typically made up of various sizes and with different amounts of twist (also known as chiralities). Each type of nanotube has its own electronic and optical properties. Physicists at Osaka University in Japan used colored light to selectively manipulate different types of carbon nanotubes. They found that some of nanotubes displayed a tendency to cluster at the focal area of a focused laser beam.
Carbon nanostructures form the future of electronics and optoelectronics
This year's Julius Springer Prize for Applied Physics will be awarded to Phaedon Avouris and Tony Heinz for their pioneering work on the electrical and optical properties of nanoscale carbon materials including carbon nanotubes − from basic science to exciting applications. The award, accompanied by US$ 5,000, will be presented at the Julius Springer Forum on Applied Physics 2008 at Harvard University in Cambridge, MA, on 27 September 2008.
Nanopencil Can Provide Terabit Data Storage Density
(PhysOrg.com) -- Scientists have fabricated a 'nanopencil' with a tip so small that it can be used as a scanning probe in ultrahigh-density computer data storage systems.

News discussion:

Nanotechnology news