Nano-sponges for toxic metals

Microscopic particles honeycombed with holes only nanometers wide soon could help purify industrial runoff, coal plant smoke, crude oil and drinking water of toxic metals, experts told UPI's Nano World.

The particles, made of glass or natural diatomaceous earth, are 5 millionths to 50 millionths of a meter wide and filled with holes a thousand times smaller. The surfaces of these particles can bear a variety of flavors or coatings that soak up specific toxic metals -- for instance, sulfurous organic coatings attract mercury, while coppery organic coatings bind to arsenic and radioactive metals known as actinides. The particles' spongy nature gives them an incredible 6,400 square feet to nearly 11,000 square feet of surface area per gram of material with which to draw in toxins.

Physical chemists at Pacific Northwest National Laboratory in Richland, Wash., developed the particles, known as SAMMS -- or self-assembled monolayers on mesoporous supports -- to remove mercury from oil in nuclear facility pumps last decade. Over the past three years, the scientists have vastly broadened the potential applications of the particles and partnered with companies to bring them into greater use.

"We have a technology that can be used to address a large number of emerging water treatment problems, with arsenic and mercury as just a couple of examples," said Richard Skaggs a civil engineer at PNNL. "For example, in Washington, D.C., and certain other parts of the country, radium in the water is a problem, and many existing conventional technologies really cannot move it or other contaminants down to acceptable levels. These nanomaterials offer a new opportunity."

The SAMMS particles can not only soak up toxic metals, but once disposed of in landfills, the particles also should prove too large for microbes to consume. Keeping microbes clean of toxins helps ensure the metals do not enter the ecosystem and become concentrated, for instance, in fish, Skaggs explained.

"We see a cost reduction of a factor of 10 when it comes to saving landfill space because only very, very small amounts of material are needed," Skaggs added.

The lab is partnering with Steward Advanced Materials in Chattanooga, Tenn., to help clean mercury from coal-plant exhaust gas emissions, to help meet Environmental Protection Agency requirements. The lab also is partnering with Perry Equipment Company, also known as PECO, in Mineral Wells, Texas, to remove naturally occurring mercury from the water found in offshore oil wells to ensure the water can safely get discharged back into the ocean.

Other projects the lab is collaborating with companies on include removing arsenic from drinking water and reducing the amount of mercury in crude oil to 5 parts per billion, because mercury concentrations as low as 25 parts per billion in oil can foul up the catalysts employed in oil refining.

The research with PECO is furthest along, Skaggs noted, and the lab hopes by next year to start engineering ways PECO can use SAMMS in products. Future research involves making production more efficient and testing other materials as potential SAMMS particles, such as carbon, which could prove durable in wide extremes of temperature and acidity.

The particles also could find use in ultra-sensitive toxin detectors, Skaggs said.

"We believe SAMMS provides a potential to implement a revolutionary change in the way we approach remediation of toxic substances," said Bob Jones, managing partner at Energy & Environmental Enterprises in Atlanta.

Copyright 2005 by United Press International

Related stories:

Cleanup method uses activated carbons to anchor toxins to bottom of the bay
Imagine a Brita filter big enough to clean up San Francisco Bay. Richard Luthy, chair of Stanford's Department of Civil and Environmental Engineering, has a plan to clean polluted sediment at Hunters Point in San Francisco with activated carbon—the same technology in many water filters. Luthy proposes to sequester dangerous toxins by mixing activated carbon, a type of carbon with a large surface area, into the bay's contaminated sediment.
Coal for hydrogen: Experiments examine hydrogen-production benefits of clean coal burning
Sandia National Laboratories researchers are studying the burning characteristics of coal to prepare the way for the coming of a hydrogen economy. That’s because while there are many long-term options for providing hydrogen as a fuel of the future, coal is the leading contender to provide a hydrogen source in the near term.
Dirty smoke from ships found to degrade air quality in coastal cities
Ah, nothing like breathing clean coastal air, right? Think again. Chemists at UC San Diego have measured for the first time the impact that dirty smoke from ships cruising at sea and generating electricity in port can have on the air quality of coastal cities.
Turning Waste Material into Ethanol
(PhysOrg.com) -- Say the word “biofuels” and most people think of grain ethanol and biodiesel. But there’s another, older technology called gasification that’s getting a new look from researchers at the U.S. Department of Energy’s Ames Laboratory and Iowa State University. By combining gasification with high-tech nanoscale porous catalysts, they hope to create ethanol from a wide range of biomass, including distiller’s grain left over from ethanol production, corn stover from the field, grass, wood pulp, animal waste, and garbage.
August brings the Perseid meteors and a cluster of planets
(PhysOrg.com) -- The annual Perseid meteor shower will peak before dawn on Aug. 12. This year the Perseids will be competing with the nearly full moon at first, but after the moon sets there will be many bright streaks in the sky.
Cassini instrument confirms liquid surface lake on Titan
Scientists have confirmed that at least one body in our solar system, other than Earth, has a surface liquid lake. Using an instrument on NASA's Cassini orbiter, they discovered that a lake-like feature in the south polar region of Saturn's moon, Titan, is truly wet. The lake is about 235 kilometers, or 150 miles, long.
Scientists determine strength of 'liquid smoke' with 3D images
(PhysOrg.com) -- Researchers have created a 3D image of a material referred to as "liquid smoke." Aerogel, also known as liquid smoke or "San Francisco fog," is an open-cell polymer with pores smaller than 50 nanometers in diameter.
NOAA takes first broad look at soot from ships
Tugboats puff out more soot for the amount of fuel used than other commercial vessels, and large cargo ships emit more than twice as much soot as previously estimated, according to the first extensive study of commercial vessel soot emissions. Scientists from NOAA and the University of Colorado conducted the study and present their findings in the July 11 issue of the journal Geophysical Research Letters.

News discussion:

Where? in Nanotechnology news