Particle emissions from laser printers might pose health concern

Certain laser printers used in offices and homes release tiny particles of toner-like material into the air that people can inhale deep into lungs where they may pose a health hazard, scientists are reporting. Their study is scheduled for the August 1 online issue of the American Chemical Society’s Environmental Science & Technology.

Lidia Morawska, Ph.D., and colleagues in Australia classified 17 out of 62 printers in the study as “high particle emitters” because they released such elevated quantities of particles, which the researchers believe to be toner, the ultrafine powder used in laser printers instead of ink to form text and images. One of the printers released particles into an experimental chamber at a rate comparable to the particle emissions from cigarette smoking, the report stated.

Thirty-seven of the 62 printers, on the other hand, released no particles that diminished air quality. Six released only low levels, and 2 medium levels. All printers were monitored in an open office, and the researchers recorded data on three laser printers in an experimental chamber. The study included popular models in the U. S. and Australia sold internationally under the Canon, HP Color Laserjet, Ricoh and Toshiba brand names.

Most of the printer-generated particles detected were ultrafine, Morawska said, explaining that such contaminants are easily inhaled into the smallest passageways of the lungs where they could pose “a significant health threat.” Previous studies have focused on emissions of volatile organic compounds, ozone, and toner particles from office printers and copiers. However, the research left broad gaps in scientific understanding of particle emissions and airborne concentrations of particles, the report noted.

Morawska and colleagues, who are with the Queensland University of Technology in Brisbane, initially were not trying to close that knowledge gap. “It wasn’t an area that we consciously decided to study,” Morawska said in an interview. “We came across it by chance. Initially we were studying the efficiency of ventilation systems to protect office settings from outdoor air pollutants. We soon realized that we were seeing air pollution originating indoors, from laser printers.”

The study found that indoor particle levels in the office air increased fivefold during work hours due to printer use. Printers emitted more particles when operating with new toner cartridges, and when printing graphics and images that require greater quantities of toner.

Funded by Queensland Department of Public Works and The Cooperative Research Centre for Construction Innovation, the ES&T report includes a list of the brands and models in the study classified by amount of particles emitted. As a result of the study, the scientists are calling on government officials to consider regulating emission levels from laser printers. “By all means, this is an important indoor source of pollution,” Morawska said. “There should be regulations.”

The health effects from inhaled ultrafine particles depend on particle composition, but the results can range from respiratory irritation to more severe illnesses, such as cardiovascular problems or cancer, Morawska said. “Even very small concentrations can be related to health hazards,” she said. “Where the concentrations are significantly elevated means there is potentially a considerable hazard.”

Larger particles also could be unhealthy without reaching the deepest parts of the lung. “Because they are larger,” Morawska added, “they contain more mass and can carry more toxins into the body. No matter how you look at it, there could be problems.”

Morawska said that more research on the health effects of inhaling printer-generated particles is needed. As a first step to lower risk, people should ensure that rooms in offices or houses are well ventilated to allow airborne particles to disperse.

Source: American Chemical Society

Related stories:

Traces of nanobubbles determine nano-boiling
Using a microscope and some extreme “snapshot” photography with shutter speeds only a few nanoseconds long, researchers from the National Institute of Standards and Technology and Cornell University have uncovered the traces of ephemeral “nanobubbles” formed in boiling water on a microheater. Their observations suggest an added complexity to the everyday phenomenon of boiling, and may affect technologies as diverse as inkjet printers and some proposed cancer therapies.
Magnetic particles act as ink in new printer
By using a laser beam to focus and push particles against a substrate, scientist Lars Helseth of Nanyang Technological University in Singapore has designed and built a unique type of colloidal printer. Taking advantage of the electrical and paramagnetic properties of tiny beads, Helseth’s printer provides a new printing method that may have applications in printing chemical and biological patterns.
Cheaper Color Printing by Harnessing Ben Franklin's Electrostatic Forces
Recent advances in the basic science of electrostatics could soon lead to color laser printers that are cheaper and up to 70 percent smaller than current models, a physicist reports at this week's AVS International Symposium and Exhibition in San Francisco.
Nanotube ink: Desktop printing of carbon nanotube patterns
Using an off-the-shelf inkjet printer, a team of scientists has developed a simple technique for printing patterns of carbon nanotubes on paper and plastic surfaces. The method, which is described in the August 2006 issue of the journal Small, could lead to a new process for manufacturing a wide range of nanotube-based devices, from flexible electronics and conducting fabrics to sensors for detecting chemical agents.
Study warns of cleaning product risks
When used indoors under certain conditions, many common household cleaners and air fresheners emit toxic pollutants at levels that may lead to health risks, according to a new study by researchers at the University of California, Berkeley, and Lawrence Berkeley National Laboratory.

Michigan State research sheds new light on health dangers of nanoparticles
The nose, usually the first line of defense against inhaled airborne particles that could damage the lungs, may itself be susceptible to the dangers of extremely small particles, called nanoparticles, which are less than 100 nanometers in size. One nanometer is one-billionth of a meter.
Printers to produce life-saving organs
A team of American scientists is studying the potential of printers being developed to produce life-saving organs, reports Wired.com. They believe that any organ, a skin graft, a new trachea or a heart patch for example, can be created using special printers. The team has already discovered the required ink and paper for the project.
Chaos, Twist Maps and Big Business
Obscure mathematical ideas developed back in the 1980s could solve current problems of mixing fluids at the microscale, and revolutionise the technology, reports an article in Science this week (23 July 2004).

The need to mix fluids at the microscale affects a whole range of developing technologies – from inkjet printers to DNA analysis – and finding ways to do it is becoming big business. Millions of dollars have already been poured into 'lab-on-a-chip' projects, but making miniature labs is not just a question of scaling things down.

News discussion:

How about a list of the printers of "death"? in Medicine & Health news