Researchers design shape-memory polymers for biomedical applications

Researchers at the Georgia Institute of Technology are developing unique polymers, which change shape upon heating, to open blocked arteries, probe neurons in the brain and engineer a tougher spine.

These so-called shape-memory polymers can be temporarily stretched or compressed into forms several times larger or smaller than their final shape. Then heat, light or the local chemical environment triggers a transformation into their permanent shape.

“My focus has been to optimize these polymers for many different biomedical applications. My lab studies how altering the chemistry and structure of the polymers affects their chemical, biological and mechanical properties,” said Ken Gall, a professor in the George W. Woodruff School of Mechanical Engineering and School of Materials Science and Engineering.

The mechanical properties of these polymers make them extremely attractive for many biomedical applications, according to Gall, who described his research in this area during two presentations at the Materials Research Society’s fall meeting in November.

Engineers are always searching for materials that display unconventional properties able to satisfy the severe requirements for implantation in the body. Particular attention must be paid to the biofunctionality, biostability and biocompatibility of these materials, which come into contact with tissue and body fluids.

With funding from the National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health (NIH), Gall proposed replacing metallic cardiovascular stents with plastic ones because polymers more closely resemble soft biological tissue. Plus, polymers can be designed to gradually dissolve in the body.

“Metal stents are frequently covered in plastic anyway, so we set out to remove the metal leaving just a polymer sheath,” explained Gall. “Also, polymers are more flexible and do not stress the artery walls like the metals.”

Gall’s research group has designed a shape-memory polymer stent that can be compressed and fed through a tiny hole in the body into a blocked artery, just like a conventional stent. Then, the warmth of the body triggers the polymer’s expansion into its permanent shape, resulting in natural deployment without auxiliary devices. This work was published in the journal Biomaterials earlier this year.

For another project, Gall and graduate student David Safranski have been investigating how altering a polymer’s chemistry changes its properties, such as stretchiness. This project was funded by MedShape Solutions, an Atlanta company that Gall co-founded to develop medical devices primarily for use in minimally invasive surgery.

“You can tailor the polymer to moderate its strength, stiffness, stretchiness and expansion rate,” noted Gall.

They found that by changing the chemistry of the polymer backbone to include special side groups, they could increase of the amount of strain the polymer could withstand before failing without sacrificing stiffness. This discovery enabled the creation of polymers that could stretch farther and also push harder during recovery.

Gall and graduate student Scott Kasprzak are exploring how these polymers might be used as a deployable neuronal probe, with funding from the National Institute of Neurological Disorders and Stroke of the NIH.

“We’re looking for smart materials that can be synthesized in the size range of 100 microns – similar to the size of a strand of hair – and then be inserted into brain tissue,” explained Gall. “This type of probe would need to slowly change shape inside the brain as to not disturb any surrounding tissue.”

Another project in Gall’s laboratory is examining the use of these polymers for the spine. Most spinal surgeries are currently not performed arthroscopically, so Gall sees benefits in using these shape-memory materials to enable minimally invasive spinal surgery.

With funding from the National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS), Gall and graduate student Kathryn Smith are developing shape-memory polymers for the spine that are tough – meaning they stretch far and support a lot of weight like native spinal disks.

“This would improve the deliverability and life of artificial disks currently used in the spine. Essentially, we’re just trying to engineer tougher synthetic polymers that can be easily delivered,” explained Gall, who is collaborating on this project with Barbara Boyan and Johnna Temenoff, both of the Coulter Department of Biomedical Engineering at Georgia Tech and Emory University.

In addition to exploring different biomedical applications for shape-memory polymers, Gall has also turned his attention to manufacturing them. Walter Voit, a graduate student in the Technological Innovation: Generating Economic Results (TI:GER) program, is investigating how to produce shape-memory polymers at a low cost. More specifically, Voit is examining different types of materials and processing methods that can be used to commercially produce quality polymers for lower cost medical applications.

Source: Georgia Institute of Technology

Related stories:

'Shape-Memory' Materials May Soon Aid Orthopedic Surgery
An early stage medical-materials company based at the Georgia Institute of Technology is developing devices that may soon improve the treatment of human orthopedic conditions.
Gaps in Adhesion
(PhysOrg.com) -- Chemists can learn from some shellfish. Mussels, for example, produce an adhesive that sticks strongly to metal and stone, even under water. Chemists have reproduced the protein responsible for this in a synthetic material that contains the same adhesive elements. Irrespective of whether the adhesive is completely made up of these elements or whether they represent just a tenth of its make-up, adhesion is equally good. These findings were made by researchers at the Max Planck Institute for Polymer Research and at the Johannes Gutenberg University in Mainz. It might be possible to use the 90% of the polymers that are not necessary to create a good bond for other functions by providing them with chemical adjuncts which will allow them to adhere to surfaces other than metal or stone. (Advanced Materials, October 2008)
Nature's own chemical plant
Petroleum is the feedstock for many products in the chemical industry. However, this fossil fuel is becoming increasingly scarce and expensive. Renewable raw materials are an alternative. But can the likes of bioethanol be obtained from sources other than foods such as sugar cane or cereals?
Scientists create tiny backpacks for cells
(PhysOrg.com) -- MIT engineers have outfitted cells with tiny “backpacks” that could allow them to deliver chemotherapy agents, diagnose tumors or become building blocks for tissue engineering.
New molecules with many branches will help unleash potential of nanotechnology
Materials science and the pharmaceutical industry could soon be revolutionized by emerging nanotechnologies based on designer molecules with long complex tree-and branch structures. Such molecules offer almost limitless scope for design of bespoke compounds for specific applications in disease therapy, for novel materials such as resins, as well as electronic displays, and energy storage. Almost every field involving design and synthesis of chemical compounds will be transformed by the arrival of technologies allowing nanoscale design of these branched molecules, known as hyperbranched polymers.
Researcher improves LCDs with 3-D nanoimaging process
Charles Rosenblatt, professor of physics and macromolecular science at Case Western Reserve University, and his research group have developed a method of 3D optical imaging of anisotropic fluids such as liquid crystals, with volumetric resolution one thousand times smaller than existing techniques. A research paper detailing the team's findings appeared in the advanced online publication of Nature Physics.
Spinning natural proteins into fabrics for new wound-repair products
Scientists in Israel are reporting the first successful spinning of a key natural protein into strong nano-sized fibers about 1/50,000th the width of a human hair. The advance could lead to a new generation of stronger, longer-lasting biocompatible sutures and bandages to treat wounds. The study is scheduled for the November 10 issue of ACS' Biomacromolecules.
Drug-embedded microparticles bolster heart function in animal studies
Researchers at Emory University and Georgia Institute of Technology have developed tiny polymer beads that can slowly release anti-inflammatory drugs and break down into non-toxic components.

News discussion:

General Science news