Using catalysts to stamp nanopatterns without ink

Using enzymes from E. coli bacteria, Duke University chemists and engineers have introduced a hundred-fold improvement in the precision of features imprinted to create microdevices such as labs-on-a-hip.

Their inkless microcontact printing technique can imprint details measuring close to 1 nanometer, or billionths of a meter, the Duke team reported in the Sept. 24, 2007 issue of the Journal of Organic Chemistry.

"This has a lot of potential, because we don't have the resolution issue," said Robert Clark, a professor of mechanical engineering and materials science and dean at Duke’s Pratt School of Engineering. “The really important part is that with a biological catalyst there’s no ink involved,” added Duke chemistry professor Eric Toone.

Clark, Toone and three graduate students authored the report on their study, which was funded by the National Science Foundation (NSF).

In traditional microcontact printing -- also called soft lithography or microstamping -- an elastic stamp’s end is cast from a mold created via photolithograpy – a technique used to generate microscopic patterns with light. Those patterns are then transferred to a surface by employing various biomolecules as inks, rather like a rubber stamp.

Microcontact printing was first reported by Ralph Nuzzo and Dave Allara at Pennsylvania State University, and developed extensively in the laboratory of George Whitesides at Harvard.

A shortcoming of traditional microcontact printing is that pattern transfer relies on the diffusion of ink from the stamp to the surface. This same diffusion spreads out beyond the limits of the pattern as the stamp touches the surface, degrading resolution and blurring the feature edges, Clark and Toone said.

Because of this mini-blurring, the practical limit to defect-free patterning is “in excess of 100 nanometers,” said the report, whose first author, Phillip Snyder, is a former Toone graduate student now working as a postdoctoral researcher in Whitesides’ group.

A 100 nanometer limit of resolution is about 1,000 times tinier than a human hair’s width. While that seems very precise, the Duke team now reports it can boost accuracy limits to less than 2 nanometers by entirely eliminating inking.

Clark and graduate student Matthew Johannes crafted a microstamp out of a gel-like material called polyacrylamide, which compresses more uniformly than the silicone material known as PDMS which is normally used in microstamping.

In lieu of ink, Snyder, Toone and graduate student Briana Vogen suspended a biological catalyst on the stamp with a molecular “tether” of amino acids. For this proof-of-principle demonstration, Toone’s team chose as a catalyst the biological enzyme exonuclease I, derived from the bacterium E. coli.

In one set of experiments, the polyacrylamide stamp pattern bearing the tethered enzymes was then pressed on a surface of gold that had been covered with a uniform coating of single-stranded DNA molecules. The DNA molecules had also been linked to fluorescent dye molecules to make the coating visible under a microscope.

Wherever the enzyme met the DNA, the end of the DNA chain and its attached dye were broken off and removed. That created a dye-less pattern of dots on the DNA coating, each dot measuring about 10 millionths of a meter diameter each.

The microdots are very precise because the catalyst that created them could not shift its position more than the length of its chemical tether -- less than 1 nanometer, the Duke team reported. "Whether the stamp was left on for a short period of time, or for days, the pattern did not change,” Clark said.

The inkless microstamp could also re-use the same suspended catalyst molecule repeatedly. “Enzymes can deteriorate with extended use,” Clark acknowledged. “But because of our tether attachment chemistry, we can easily wash the old enzyme off, put on a new one and keep going,” Clark said.

In follow-up research, Clark and Toone are now evaluating more durable microstamping materials attached to longer lasting catalysts that are non-enzymatic.

By using different catalysts in succession, future versions of the inkless technique could be used to build complex nanoscale devices with unprecedented precision, the two predicted.

“Soft lithography has really revolutionized the field of surface science over the last 30 years,” said Toone. “And I honestly believe that using catalysts instead of diffusive processes is going to become the way that soft lithography is done in the future.”

Source: Duke University

Related stories:

Molecular 'fishing' technique paves way for advanced hand-held sensing devices
A new molecular "fishing" technique developed by researchers at Duke University and Duke's Pratt School of Engineering lays the groundwork for future advances in hand-held sensing devices.
Automation of Nanotech Manufacturing May Be Ahead
In an assist in the quest for ever smaller electronic devices, Duke University engineers have adapted a decades-old computer aided design and manufacturing process to reproduce nanosize structures with features on the order of single molecules.
'All-optical' switch could advance light-based telecommunications
Duke University physicists have developed a switching technique that uses a very weak beam of light to control a much stronger beam. The achievement could make optical telecommunications devices perform far more efficiently, and perhaps also aid in the development of futuristic quantum communications devices, the scientists said.
Long Wait Before Next China Quake?
A new analysis of the setting for May's devastating earthquake in China shows that the quake resulted from faults with little seismic activity--and that similar events in that area occur, on average, only once every 2,000 to 10,000 years. However, geologists caution that because earthquakes can sometimes occur in clusters, people should still be wary of another possible large-scale earthquake.
R&D 100 Award for new NIST/UMD neutron detector
A new ultrasensitive, high bandwidth neutron detector developed by the National Institute of Standards and Technology (NIST) and the University of Maryland (UMD) will receive one of this year's "R&D 100 Awards," it was announced on July 1. The annual R&D 100 Awards program recognizes "the 100 most technologically significant products introduced into the market" during the previous year, as selected by an independent judging panel and the editors of R&D Magazine.
Crop management: How small do we go?
The use of on-the-go crop and soil sensors has greatly increased the precision with which farmers can manage their crops. Recently released research in Agronomy Journal questions whether more precise management is necessarily more efficient. They discovered that the law of diminishing returns applies to precision agriculture, calculating how large of an application area is optimal for precision management techniques. According to the authors, this change could present significant cost savings for farmers.
China quake rare and unexpected, new study says
A new analysis of the setting for last month's devastating earthquake in China by a team of geoscientists at MIT shows that the quake resulted from faults with little seismic activity, and that similar events in that area occur only once in every 2,000 to 10,000 years, on average.
NIST releases preview of much-anticipated online mathematics reference
The National Institute of Standards and Technology (NIST) has released a five-chapter preview of the much-anticipated online Digital Library of Mathematical Functions (DLMF). In development for over a decade, the DLMF is designed to be a modern successor to the 1964 "Handbook of Mathematical Functions," a reference work that is the most widely distributed NIST publication (with over a million copies in print) and one of the most cited works in the mathematical literature (still receiving over 1,600 yearly citations in the research literature). The preview of the new DLMF is a fully functional beta-level release of five of the 36 chapters.

News discussion:

General Science news