Method slashes quantum dot costs by 80 percent

Rice scientists replace pricey solvents with cheap processing fluids

In an important advance toward the large-scale manufacture of fluorescent quantum dots, scientists at Rice University have developed a new method of replacing the pricey solvents used in quantum dot synthesis with cheaper oils that are commonplace at industrial chemical plants.

Rice's study, which was conducted under the auspices of the Center for Biological and Environmental Nanotechnology (CBEN), is published online and slated to appear in the October issue of the journal Nanotechnology.

"CBEN started to undertake some exploratory work more than a year ago on the scale-up issues of quantum dot manufacture, but the solvents turned out to be so expensive that we just couldn't afford to run more than a few large-reactor experiments," said the study's lead author, Michael Wong, assistant professor of chemical and biomolecular engineering and of chemistry. "That was a great reality check, and it made us look at the problem of solvent cost sooner rather than later."

Quantum dots typically cost more than $2,000 per gram from commercial sources, and pricey solvents like octadecene, or ODE - the least expensive solvent used in quantum dot preparation today - account for about 90 percent costs of raw materials.

Heat-transfer fluids - stable, heat-resistant oils that are used to move heat between processing units at chemical plants - can cost up to seven times less than ODE. Replacing ODE with the heat-transfer fluid Dowtherm A, for example, reduces the overall materials cost of making quantum dots by about 80 percent.

Quantum dots are tiny crystals of semiconducting materials - cadmium selenide or CdSe is the most popular flavor - that measure just a few nanometers in diameter. Most of the commercial possibilities discussed for quantum dots - bioimaging, color displays, lasers, etc. - relate to their size-controlled fluorescence. For example, CdSe quantum dots have the ability to absorb high-energy photons of ultraviolet light and re-emit them as photons of visible light. They glow different colors, depending on the size, shifting from the red to the blue end of the spectrum as the crystals get smaller.

The reproducible synthesis of high-quality quantum dots became a reality in the early 1990s when researchers at MIT pioneered a new method of producing quantum dots with uniform sizes and well-defined optical signatures. The basic recipe for making quantum dots hasn't changed much since it was first developed. A solvent is heated to almost 500 degrees Fahrenheit, and solutions containing cadmium and selenium compounds are injected. They chemically decompose and recombine as pure CdSe nanoparticles. Once these nanocrystals form, scientists can adjust their optical properties by growing them to precisely the size they want by adjusting the cooking time.

The solvent originally used for this process was trioctylphosphine oxide, or TOPO, which costs more than $150 per liter. Later, other scientists introduced a new recipe by replacing TOPO with a mixture of ODE and oleic acid.

Wong said the CBEN research team, which included CBEN Director Vicki Colvin, professor of chemistry, and Nikos Mantzaris, assistant professor of chemical and biomolecular engineering and of bioengineering, had some initial doubts about whether heat-transfer fluids could be substituted for ODE.

"They were cheap and they didn't break down at high temperatures, but no one uses these compounds for chemical reactions," said Wong. In addition to finding that other quantum dot nanostructures could be made in heat- transfer fluids, the team concluded that any solvent could be used to replace ODE. Thanks to a mathematical modeling approach developed by Mantzaris, the team now has a method for predicting the particle size and growth behavior of quantum dots based on only three physical properties of a given solvent: viscosity, surface free energy and solubility of bulk cadmium selenide powder.

Source: Rice University

Related stories:

Scientists take the sharpest image ever made with light
(PhysOrg.com) -- A team of scientists from the Technische Universität Dresden (Germany) and the ESRF in Grenoble (France) has produced the image of an object at the highest resolution ever achieved with X-ray light. A 100-nanometre gold particle fixed on a substrate was reconstructed with 5 nanometre resolution. Contrary to other techniques, X-ray imaging works also in real-life environments like chemical processing or in the presence of high magnetic fields. The team reports its findings in the newest issue of Phys. Rev. Lett. dated 5 September 2008 (published online 29 August 2008).
Operating quantum memory at room temperature
Quantum dots, along with quantum wires, have been attracting notice over the past decade as possible building blocks of quantum information processing. Indium arsenide quantum dots (InAs) can be used for memory operations in devices made from gallium arsenide and aluminum gallium arsenide (known as GaAs/AlGaAs devices). The problem is that at room temperature – the experiments are usually done at lower temperatures, the memory operation of these devices suffers, unless there are multiple quantum dot layers.
Fast quantum computer building block created
(PhysOrg.com) -- The fastest quantum computer bit that exploits the main advantage of the qubit over the conventional bit has been demonstrated by researchers at University of Michigan, U.S. Naval Research Laboratory and the University of California at San Diego.
Light touch: Controlling the behavior of quantum dots
Researchers from the National Institute of Standards and Technology and the Joint Quantum Institute (JQI), a collaborative center of the University of Maryland and NIST, have reported a new way to fine-tune the light coming from quantum dots by manipulating them with pairs of lasers. Their technique, published in Physical Review Letters, could significantly improve quantum dots as a source of pairs of “entangled” photons, a property with important applications in quantum information technologies.
First reported video of cell's recognition of danger through its protein response
(PhysOrg.com) -- Cells are expected to respond defensively when an antigen lands on a cell membrane and prepares to cause mischief.
Nanoparticles + light = dead tumor cells
Medical physicists at the University of Virginia have created a novel way to kill tumor cells using nanoparticles and light. The technique, devised by Wensha Yang, an instructor in radiation oncology at the University of Virginia, and colleagues Ke Sheng, Paul W. Read, James M. Larner, and Brian P. Helmke, employs quantum dots. Quantum dots are semiconductor nanostructures, 25 billionths of a meter in diameter, which can confine electrons in three dimensions and emit light when exposed to ultraviolet radiation.
Improving Quantum Dot Synthesis
Materials researchers at the National Institute of Standards and Technology have developed a simplified, low-cost process for producing high-quality, water-soluble quantum dots for biomedical applications. By using a laboratory microwave reactor to promote the synthesis of the widely used nanomaterials, the recently published NIST process avoids a problematic step in the conventional approach to making quantum dots, resulting in brighter, more stable dots.
Study shows quantum dots can penetrate skin through minor abrasions
Researchers at North Carolina State University have found that quantum dot nanoparticles can penetrate the skin if there is an abrasion, providing insight into potential workplace concerns for healthcare workers or individuals involved in the manufacturing of quantum dots or doing research on potential biomedical applications of the tiny nanoparticles.

News discussion:

Nanotechnology news