For a Bigger Hard-drive, Just Add Water

Ferroelectric materials possess spontaneous and reversible electric dipole moments. Until recently, it was technologically difficult to stabilize ferroelectricity on the nano-scale. This was because the traditional process of screening the charges was not completely effective. However Jonathan Spanier from Drexel University and his research colleagues have proposed a new and slightly unusual mechanism stabilizing the ferroelectricity in nano-scaled materials: surrounding the charged material with fragments of water.

All ferroelectric materials, even Spanier’s wires that are 100,000 times finer than a human hair, need to be screened to ensure their dipole moments remain stable. Traditionally this was accomplished using metallic electrodes, but Spanier and his team found that molecules such as hydroxyl (OH) ions, which make up water, and organic molecules, such as carboxyl (COOH), work even better than metal electrodes at stabilizing ferroelectricity in nano-scaled materials, proving that sometimes water and electricity do mix.

“It is astonishing to see that molecules enable a wire having a diameter equivalent to fewer than ten atoms to act as a stable and switchable dipole memory element,” said Spanier, an assistant professor of materials science and engineering at Drexel.

If commercialized, ferroelectric memory of this sort could find its way into home computers, rendering traditional hard-drives obsolete. The extreme capacity offered by such a device could easily put a room full of hard-drives and servers into a jacket pocket, but this idea can be applied to other computer components, such as ferroelectric RAM.

RAM is necessary in a computer because it stores information for programs that are currently running. As this news release was written, RAM stored the words in a file. Because RAM can transfer files faster than a hard-drive, it is used to handle running programs. However most RAM is volatile, and if the computer loses power all the information in RAM is lost. This is not the case with ferroelectric memory.

Ferroelectric memory is non-volatile, so it is entirely possible for files to be stored permanently in a computer’s RAM. Applying nano-wires and the new stabilization method to existing ferroelectric RAM would deal a double blow to hard-drives in size and speed.

Spanier and his colleagues, Alexie Kolpak and Andrew Rappe of the University of Pennsylvania and Hongkun Park of Harvard University, are excited about their findings, but say significant challenges lie ahead, including the need to develop ways to assemble the nanowires densely, and to develop a scheme to efficiently write information to and read information from the nanowires. In the interim, Spanier and his colleagues will continue to investigate the role of molecules on ferroelectricity in nanowires and to develop nano-scaled devices that exploit this new-found mechanism.

Source: Drexel University

Remembering the future
As electronics designers cram more and more components onto each chip, current technologies for making random-access memory (RAM) are running out of room. European researchers have a strong position in a new technology known as resistive RAM (RRAM) that could soon be replacing flash RAM in USB drives and other portable gadgets.
Tiny Bubbles in Nanofilms
A group of theoretical physicists at the University of Arkansas has demonstrated that under applied voltages, thin films composed of technologically important ferroelectric materials form "nanobubbles," which have the potential to become a way to store lots of information in a tiny space. This could impact technologies from computers and portable electronics such as cell phones and MP3 players, to radio frequency identification devices.
Epson and Fujitsu Announce Joint Development of Next-Generation Technology for FRAM Non-Volatile Memory
Seiko Epson Corporation and Fujitsu Limited today announced their agreement for joint development of next-generation technology for Ferroelectric Random Access Memory (FRAM) non-volatile memory.
Industry's First 'Smart' SD Memory Card
Matsushita Electric Industrial Co., Ltd., best known for its Panasonic brand products, has developed the industry’s first SD Memory Card with contactless smart card capabilities. Called smartSD Card, the new SD Memory Card combines the convenience of contactless data communication capabilities with large storage capacity and high security. The company will position the smartSD Card as key to realizing the "ubiquitous network society" and will strive to create new business opportunities not only in the device sector but also in the system and solution service sectors. Sample shipments of the smartSD Cards will commence in December 2004. Commercial shipments are expected to follow in the fall of 2005.
Novel memory device is set to rival transistor-switched silicon-based memory
Working with an international group of researchers, Professor Gehan Amaratunga has produced a novel memory device which is set to rival transistor-switched silicon-based memory.
Oh Baby! First photograph of early modern computer
Here is the first known photograph of the great grandfather of modern digital computers – but you couldn’t use it on the train or take it jogging with you.
Researchers develop new image-recognition software
It takes surprisingly few pixels of information to be able to identify the subject of an image, a team led by an MIT researcher has found. The discovery could lead to great advances in the automated identification of online images and, ultimately, provide a basis for computers to see like humans do.
Researchers Move Closer To New Class of Memory
Computer memory that combines the high performance and reliability of flash with the low cost and high capacity of the hard disk drive could be closer than you think, thanks to a team of IBM scientists.

For a Bigger Hard-drive, Just Add Water

Related stories:

News discussion: