RIT students design deep-sea explorer to search for Lake Ontario shipwrecks

It's designed to explore the depths of large bodies of water--and one recent weekend, that's exactly where it was found: searching the depths of the deep end of Judson Pool in Rochester Institute of Technology's Gordon Field House and Activities Center. (As the adage goes, every journey begins with a single step.)

A team of RIT engineering majors built the explorer, an underwater remote-operated vehicle, or ROV--and it has been described as one of the most ambitious student projects ever at RIT. This spring and summer, the device will be used to explore century-old shipwrecks resting on the bottom of Lake Ontario and the Atlantic Ocean--giving human explorers their first glimpses of some all-but-forgotten vessels lost to the seas.

The nine-member RIT team is led by Dan Scoville, a 2005 RIT graduate who has located and explored three "virgin" (previously undiscovered) shipwrecks in Lake Ontario in the past five years. Scoville, who personally backed the ROV project financially, now has his sights set on two undisclosed Lake Ontario shipwrecks (one is an 1800s-era schooner--the names and precise locations of the vessels won't be revealed until this fall) and, working with the Undersea Research Center at the University of Connecticut, the steamship Portland, which sank off the coast of Gloucester, Mass, in 1898.

Some of the fewer than a thousand ships lost in Lake Ontario have been discovered and salvaged, while others are in water too deep to explore, Scoville says. That leaves a small number--perhaps a dozen--in the 100-to-400-foot-depth range in the area from the Niagara River to Oswego accessible to explorers such as Scoville. But they're not easily found, Scoville says. Even after they're located, they can't be salvaged because those between the shores of New York and the international line are considered state property.

"We do it because we love doing it," says Scoville, an electrical engineer with Hydroacoustics Inc. and a scuba diver for about 10 years. "When you find one, it's neat. It's a really cool experience.

Little device makes a big splash

The small, 60-pound, battery-powered ROV, designed and built over two quarters, is equipped with up to four removable video cameras, four high-intensity lamps (serving, in essence, as headlights), a navigational compass, a timer, and sensors to measure depth, pressure and temperature. Four variable-speed motors enable vertical, forward and reverse movement and turning maneuverability. RIT students custom-built most circuit boards, wrote the software and created the graphical user interface used to control the device. All components are housed in watertight canisters (using 88 seals); a lightweight aluminum frame is rugged and modifiable.

The explorer is controlled by a joystick attached to a laptop computer that communicates with a microprocessor (the ROV's "command center") via a 680-foot-long fiber-optic cable. A human at the controls sees what the ROV "sees" through live video streaming and sensor readings.

The device is capable of diving at about two feet per second to a depth of 400 feet--about twice as deep as a skilled scuba diver can descend. A foam top helps achieve neutral buoyancy, enabling the ROV to remain level while underwater. A 100-minute battery life allows it to stay underwater longer than human divers. Future enhancements may include the addition of a mechanical arm and extended diving capability--perhaps enabling the explorer to reach Lake Ontario's maximum depth of about 800 feet.

Building the ROV cost the RIT team about $15,000, including $10,000 from sponsors. An equivalent commercially produced underwater ROV would cost $20,000 to $50,000, Scoville says. He describes the members of his team as not merely students, but skilled, practicing engineers.

"I lucked out with a really good team," he says. "We were told it couldn't be done."

Source: Rochester Institute of Technology

Related stories:

Caltech astronomers describe the bar scene at the beginning of the universe
Bars abound in spiral galaxies today, but this was not always the case. A group of 16 astronomers, led by Kartik Sheth of NASA's Spitzer Science Center at the California Institute of Technology, has found that bars tripled in number over the past seven billion years, indicating that spiral galaxies evolve in shape.
Rare 'Star-Making Machine' Found in Distant Universe
Astronomers have uncovered an extreme stellar machine -- a galaxy in the very remote universe pumping out stars at a surprising rate of up to 4,000 per year. In comparison, our own Milky Way galaxy turns out an average of just 10 stars per year.
Chemists measure chilli sauce hotness with nanotubes
Oxford chemists have found a way of using carbon nanotubes to judge the heat of chilli sauces. The technology might soon be available commercially as a cheap, disposable sensor for use in the food industry.
Hubble Discovers 67 New Gravitationally Lensed Galaxies in the Distant Universe
Astronomers using NASA's Hubble Space Telescope have compiled a large catalog of gravitational lenses in the distant universe. The catalog contains 67 new gravitationally lensed galaxy images found around massive elliptical and lenticular-shaped galaxies. This sample demonstrates the rich diversity of strong gravitational lenses. If this sample is representative, there would be nearly half a million similar gravitational lenses over the whole sky.
World's hottest chile pepper discovered
Researchers at New Mexico State University recently discovered the world’s hottest chile pepper.
New 3-D Map of Dark Matter Reveals Cosmic Scaffolding
An international team of astronomers has created a comprehensive three-dimensional map that offers a first look at the weblike large-scale distribution of dark matter in the universe. Dark matter is an invisible form of matter that accounts for most of the universe's mass, but that so far has eluded direct detection, or even a definitive explanation for its makeup.

News discussion:

Space & Earth science news