Research on Novel Materials Holds Key to Extending Immersion Lithography

These technology initiatives, all being spearheaded by SEMATECH through R&D agreements spanning three continents, were detailed in four papers and associated meetings during SPIE. Presenters reported steady progress in preparing key materials for extending 193i past the 45 nm technology generation, where it will first be employed. These results also will allow Sematech members and the semiconductor industry to make critical decisions regarding the ability to assess the extensibility of 193i by the end of 2007.

Emerging as a promising 193i lens material is lutetium aluminum garnet (LuAG), a crystalline mineral first identified in 2005 through Sematech-supported research at the National Institute of Standards and Technology. LuAG is attractive to lithographers because of its high refractive index of 2.14, compared to 1.56 for fused silica lenses currently used in semiconductor exposure tools. The higher index can be used to produce a larger numerical aperture (NA), which in turn can help utilize 193 nm light to define microcircuits much narrower than the wavelength.

Consequently, Sematech has launched a joint development agreement with Germany’s Schott Lithotec to develop mid-sized, projection-quality LuAG lens elements with a diameter of 80 mm. These prototypes will establish the framework to test the feasibility of full-scale LuAG lenses, which will need to be around 150 mm in diameter for high-volume manufacturing.

The project’s goal is to produce a LuAG lens in 2009 to support beta exposure tools that could become available in 2010. At a Sematech-sponsored materials review, all three major exposure tool-makers reported that the crystal’s drawback of moderate intrinsic birefringence, which distorts light waves, could be corrected for manufacturing. Schott representative Dr. Lutz Parthier predicted that his company would produce a production-worthy lens-blank by 2009. “All available test results don’t reveal any technical showstoppers” to this goal, he said.

Analysis of second- and third-generation immersion fluids likewise produced a set of hopes and challenges. Several companies have revealed hydrocarbon based fluids having a refractive index between than 1.6 and 1.7. However, such fluids darken under laser irradiation, and leave residue on the lens surface. Also, ways must be found to prevent advanced fluids—which typically are viscous—from leaving behind microscopic droplets during removal.

Sematech is addressing these issues through support of research groups at MIT Lincoln Laboratory and at the University of Wisconsin. In addition, through three universities, Sematech is pursuing approaches to third generation fluids—based on nanocomposites, carbon-ring organics and hetero-compounds—with refractive indexes above 1.8.

Separately, Sematech sponsored research at the University of Queensland in Australia has recently developed a sulfur-based platform to demonstrate the first imaging with a resist index of 1.76. High-index resist offers the possibility of extending 193i even further, and developing a broader process window as well.

“We need to make the technology for these future generations available in the next 10 ½ months—that’s our mission,” said Bryan Rice, manager of Sematech’s 193i program. “We need to offer a choice of technologies to semiconductor manufacturers.”

Source: Sematech

International Symposium Identifies Top Issues for sub-40 nm Immersion Litho
Bolstered by evidence that 193 nm immersion (193i) lithography is here to stay, semiconductor technology leaders have identified the top five critical issues for extending the breakthrough imaging process toward the 32 nm technology generation.
Sematech Advances Feasibility of 193 nm Immersion Lithography for 45 nm
Sematech researchers have successfully used 193 nm immersion technology (193i) at 1.3 numerical aperture (NA) with azimuthal polarization to pattern features narrower than 45 nm half-pitch in multiple orientations simultaneously. Azimuthal polarization allows for aggressive imaging of arbitrary circuit features beyond simple line-and-space test patterns.
193 nm Immersion Litho Continues to Pass Industry Scrutiny, Symposium Finds
Vancouver, BC (19 August, 2004) – With no apparent obstacles to slow its progress, 193 nm immersion (193i) lithography continues to move toward manufacturing insertion in 2007 and holds promise for future extension, an international symposium concluded here recently.
SEMATECH and Exitech to Develop the World’s First Ultra High Numerical Aperture 193 nm Immersion Lithography Tool
Austin, Texas and Oxford, England (7 July 2004) -- International SEMATECH and Exitech have announced an agreement to develop the world’s first ultra high numerical aperture (NA = 1.3) 193 nm wavelength immersion lithography tool. This groundbreaking microexposure tool, the MS 193i, will help speed the development of critical infrastructure for immersion lithography at SEMATECH’s Immersion Technology Center in Austin, Texas.
Intel, Samsung, TSMC Reach Agreement for 450mm Wafer Manufacturing Transition
Intel Corp., Samsung Electronics and TSMC today announced they have reached agreement on the need for industry-wide collaboration to target a transition to larger, 450mm-sized wafers starting in 2012. The transition to larger wafers will enable continued growth of the semiconductor industry and helps maintain a reasonable cost structure for future integrated circuit manufacturing and applications.
SEMATECH Achieves Single Digit EUV Mask Blank Defect Goal
Technologists at SEMATECH have successfully demonstrated world-class results in low defect density for mask blanks used in extreme ultraviolet lithography (EUVL)—pushing the technology another significant step toward readiness for advanced manufacturing.
Novel gate dielectric materials: perfection is not enough
For the first time theoretical modeling has provided a glimpse into how promising dielectric materials are able to trap charges, something which may affect the performance of advanced electronic devices. This is revealed in a paper published on the 12th October in Physical Review Letters by researchers at the London Centre for Nanotechnology and SEMATECH, a company in Austin, Texas.
Sematech Reveals Details on Practical High-K Metal Gate Systems for 45nm And Beyond
Building on their successful CMOS solution for gate‑first, thermally stable, high-k dual metal gates, SEMATECH researchers have released further data that portends a new era in which future transistor scaling is dominated by heterogeneous integration of new materials onto silicon.

Research on Novel Materials Holds Key to Extending Immersion Lithography

Related stories:

News discussion: