UF engineer develops tiny, easily mass-produced motion sensor

A University of Florida engineer is the latest researcher to design a tiny, easy-to-manufacture motion sensor, a development that could help popularize the sensors as standard equipment in personal electronics, medical devices and other applications.

The sensor, which measures about 3 square millimeters or one-tenth of an inch, is not the smallest motion sensor ever invented. But it is extremely sensitive, draws only a tiny amount of electrical power and -- most important – is one of a new generation of sensors that can be made using the computer chip manufacturing industry's standard techniques and equipment.

That means that in the near future "the application range can be expanded a lot," said Huikai Xie, a UF assistant professor of electrical and computer engineering.

Xie is one of five authors of a paper describing the sensor that appeared in the December issue of the journal Institute of Electrical and Electronics Engineers Transactions on Circuits and Systems.

Motion sensors are hardly new, but they were large, heavy and typically used in airplanes and ships for navigational purposes in recent decades. Miniaturization techniques developed as part of a relatively new field called Micro Electrical Mechanical Systems, or MEMS, have steadily reduced their size and cost.

The result is that the sensors are steadily becoming commonplace in commercial products. Today's cars, for example, contain tiny accelerometers that deploy airbags after sensing the sudden stops or changes in motion that occur during collisions. A small number of cell phones, personal digital assistants and laptops also now carry motion sensors, said Dave Monk, the manager for sensor operations at Freescale Semiconductor, the nation's third-largest chip manufacturer.

They have several functions, he said. In PDAs, they may allow users who are reading a book to "turn the page" by simply turning the PDA over in their palm and then turning it back again, he said. And in cell phones, the motion sensors may sense when the phone has been dropped and shelter the hard drive to prevent memory loss.

Xie believes these sorts of applications are only the beginning. Cheap, tiny, easily made and paired with wireless technology, motion sensors could be easily worn or even sewn into clothes, he said. That could help coaches zero in on the movements of athletes, or nurses working at a distance monitor elderly people in their homes.

"This can be used to monitor an athlete's physical activities, determining maximum shock during a football game, with the sensor placed inside the pads or helmet," Xie said.

It's even possible that the sensors could be implanted in bones during surgeries, giving orthopedic surgeons a unique way to monitor the progress of repairs, he said.

These developments have been stalled by high costs because many of the tiniest sensors developed so far require new or nonstandard manufacturing technology. Xie and other UF team members, including doctoral students Hongwei Qu and Deyou Fang, sought to solve this problem in their new research.

In a three-year-old project originally funded with a $170,000 grant from NASA, they developed a single-chip sensor that can be manufactured using Complementary Metal Oxide Semiconductor technology, the industry standard for silicon chip manufacturing.

The chip uses about one-thousandth of a watt of power, meaning it has the potential to operate for as long as a year on a standard watch battery. It is also extremely sensitive, so much so that it can register sound as well as motion.

Monk, of Freescale Semiconductor, said Xie's research is important because its applied nature makes it highly useful to industry. "I see these engineers going all the way to putting it into a package, showing why it could be manufactured, showing all the critical components – that's a whole lot closer to where we would pick it up," he said.

Although developing the first few sensors was expensive, Xie estimated it could cost $10 or less if mass produced. He and his graduate students have installed several sensors in a cigarette pack-sized board of electronics to test their capabilities. UF also is pursuing a patent on the sensor.

"Eventually, you can wear all kinds of sensors with you to monitor everything you want to know - your heartbeat, your blood pressure or even something like your glucose concentration," Xie said. "I think this is a very interesting, exciting field that will eventually help people live much higher quality of life."

Source: University of Florida

Related stories:

Tongue-controlled System Assists Individuals with Disabilities
A new assistive technology developed by engineers at the Georgia Institute of Technology could help individuals with severe disabilities lead more independent lives.
Mayfly-Mimicking Sensor Could be High Tech 'Canary in the Coal Mine'
Security, health and safety sensors in coal mines, buildings or underground public transit areas where air or water does not readily flow may one day be improved by research on young mayflies at the University of Maryland.
Student Innovation Could Improve Data Storage, Magnetic Sensors
Paul Morrow has come a long way from his days as an elementary school student, pulling apart his mother’s cassette player. The talented young physicist has developed two innovations that could vastly improve magnetic data storage and sense extremely low level magnetic fields in everything from ink on counterfeit currency to tissue in the human brain and heart.
Make Way for the Real Nanopod: Researchers Create First Fully Functional Nanotube Radio
Make way for the real nanopod and make room in the Guinness World Records. A team of researchers with the US Department of Energy's Lawrence Berkeley National Laboratory and the University of California at Berkeley have created the first fully-functional radio from a single carbon nanotube, which makes it by several orders of magnitude the smallest radio ever made.
Drivers Unwanted: MIT 'Robocar' takes a spin
A team of MIT faculty and researchers including 20 students are working toward what could be the car of the future: a vehicle that drives itself, with people as passengers.
ESA and NASA sign agreement on James Webb Space Telescope, LISA Pathfinder
At a ceremony that took place today at the Paris Air Show at Le Bourget, ESA Director General Jean-Jacques Dordain and NASA Administrator Michael Griffin signed the official agreements that define the terms of the cooperation on the James Webb Space Telescope (JWST) and on the Laser Interferometer Space Antenna (LISA) Pathfinder mission.
Microorganisms act as tiny machines in future MEMS devices
The single-celled Spirostomum is a tiny brown worm that can contract its 500-micrometer-long body to 25% of its length in a millisecond, making this protozoan the fastest-contracting microorganism known. Scientists think of microorganisms like this as tiny functional machines. After all, many of them have capabilities far surpassing the current state-of-the-art in MEMS (Microelectromechanical Systems) technology.
Earthshaking images
The powerful earthquake struck suddenly, shaking the seven-story building so hard it bent, cracked and swayed in response. But this was no ordinary earthquake.

News discussion:

Technology news