Nano World: Black silicon for solar power

Flat silicon surfaces are normally highly reflective. Scientists want to minimize reflection as much as possible when it comes to solar power cells made of silicon, because the more light they reflect, the less they convert to electricity. Often, anti-reflective coatings are used, which reduce the amount of average reflection in the wavelengths of light solar power cells use by 85 percent to 92 percent.

The novel treatment developed by researchers at the Technical University of Munich can cut the surface reflection silicon experiences by 95 percent to 98 percent across the wavelengths of light solar power cells use, making them black.

"The results are really good when it comes to preventing reflection. It is still speculative as to how much this can boost the efficiency of solar cells. I am optimistic that for traditional designs of solar cells, it could give a 15 to 20 percent improvement with respect to their present efficiency. The performance of some solar cells with novel design could be improved even more dramatically. However, I think we will need a bit of time to show this," said researcher Svetoslav Koynov, a physicist.

The researchers created nanometer pits and bumps on the silicon, which end up helping to absorb light. Prior techniques had developed such textures on silicon as well using plasma etching, but are complex, difficult to work over large surfaces and can incur damage, making large-scale production of solar power cells with them a problem.

Koynov and his colleagues instead developed a simple and fast technique that creates these textures using wet chemical processes. Their method works regardless of the crystalline structure of the silicon, its thickness, or what extra chemical additives it possesses. The fact the technique is so flexible could mean it could work on silicon surfaces that cannot handle other kinds of anti-reflection treatments, such as the silicon thin films used in advanced hybrid solar cells, Koynov suggested.

First the researchers deposit grains of gold only nanometers large onto a flat silicon surface. Next the silicon between the areas covered by the clusters is etched away with a solution of hydrogen peroxide and hydrofluoric acid. The gold nanoparticles exhibit catalytic action, "behaving like drills into the surface," Koynov said. The areas covered by the gold form 50-to-100-nanometer-high pits on the surface while the silicon between the gold makes up the bumps. The nanoparticles are then removed with a solution of iodine and potassium iodide.

"This is a very easy way to get an extremely non-reflective silicon surface," said physicist Howard Branz at the National Renewable Energy Laboratory in Golden, Colo. "We've tried it and it works."

The researchers are currently attempting to establish an industrial partner to advance their method forward. "If we are able to establish a good connection with an industrial partner, I'd hope in one to three years we could go to market," Koynov said.

"This is an important breakthrough on an important problem," said theoretical physicist Alexander Efros at the Naval Research Laboratory in Washington. "It is clear this could find application for increasing the efficiency of solar cells."

Koynov cautioned the gold nanoparticles could react unfavorably with the semiconductors in solar cells. He added his team has experimented with using other metal nanoparticles as well, with some success.

Copyright 2006 by United Press International

Sharp Launches Mass Production of 2nd-Generation Thin-Film Solar Cells
Sharp Corporation has completed installation of a new 2nd-generation thin-film solar cell production line at its Katsuragi Plant (Katsuragi City, Nara Prefecture) using large-size glass substrates measuring 1,000 x 1,400 mm, equivalent to 2.7 times the area of conventional substrates (560 x 925 mm), and will begin volume production this October.
Slicing solar power costs: New method cuts waste in making most efficient solar cells
University of Utah engineers devised a new way to slice thin wafers of the chemical element germanium for use in the most efficient type of solar power cells. They say the new method should lower the cost of such cells by reducing the waste and breakage of the brittle semiconductor.
Polymer electric storage, flexible and adaptable
(PhysOrg.com) -- The proliferation of solar, wind and even tidal electric generation and the rapid emergence of hybrid electric automobiles demands flexible and reliable methods of high-capacity electrical storage. Now a team of Penn State materials scientists is developing ferroelectric polymer-based capacitors that can deliver power more rapidly and are much lighter than conventional batteries.
Flexible nanoantenna arrays capture abundant solar energy
Researchers have devised an inexpensive way to produce plastic sheets containing billions of nanoantennas that collect heat energy generated by the sun and other sources. The technology, developed at the U.S. Department of Energy's Idaho National Laboratory, is the first step toward a solar energy collector that could be mass-produced on flexible materials.
Researchers Produce Best-Yet Dye-Based Solar Cells
In work that may help solar panels become a more viable source of mainstream power, a research group has created a dye-based solar cell with a high efficiency and high stability, and that lacks the volatile chemicals used in similar cells. This is a combination so far lacking in the newest solar-cell prototypes.
'Nanonet' circuits closer to making flexible electronics reality
Researchers have overcome a major obstacle in producing transistors from networks of carbon nanotubes, a technology that could make it possible to print circuits on plastic sheets for applications including flexible displays and an electronic skin to cover an entire aircraft to monitor crack formation.
First Solar: Quest for the $1 Watt
Photovoltaic cells, once so costly they could be used only to power million-dollar satellites, are today turning up even on humble parking meters. Now a brash Tempe, Ariz., company called First Solar plans to take the technology to the next level by making it cost-effective enough to compete with coal-fired generation.
Breakthrough in efficiency for dye-sensitized solar cells
In a paper published in the journal Nature Materials, EPFL professor Michael Graetzel, Shaik Zakeeruddin and colleagues from the Changchun Institute of Applied Chemistry at the Chinese Academy of Sciences have achieved a record light conversion efficiency of 8.2% in solvent-free dye-sensitized solar cells.

Nano World: Black silicon for solar power

Related stories:

News discussion: