Infineon Technologies AG today announced sample availability of the SMARTi PM, a single-chip CMOS radio frequency (RF) transceiver for GSM, GPRS and EDGE mobile phones. With SMARTi PM, a complete GPRS/EDGE radio can be implemented on 50 percent less board space saving 30 percent in components’ cost compared to competing solutions. The high integration level of the SMARTi PM allows handset manufacturers to minimize the number of external components needed for a GSM/GPRS/EDGE RF design to less then 15. The polar modulator architecture eliminates the need of any isolator or extra filter components in the transmitter path. The latest member of Infineon’s successful SMARTi RF transceiver family features GPRS/EDGE data service class 1 to 12 for fast data transfer and quad-band applications. The single-chip solution providing ease-of-use and high manufacturability allows handset manufacturers to rapidly enter the market with multiple designs based on the same chip platform.
The SMARTi PM (PMB 6272) is a quad-band single-chip CMOS transceiver for GSM/GPRS/EDGE 850/900/1800/1900 voice and high-performance data transfer applications. Existing products using Infineon’s SMARTi SD and SD2 transceivers can easily be upgraded to EDGE capability due to interface compatibility between SMARTi SD, SD2 and SMARTi PM.
“The introduction of an integrated GSM/GPRS/EDGE CMOS transceiver is an important milestone in rolling out our new line of highly competitive RF transceivers based on low-power CMOS technology,” said Stefan Wolff, Vice President and General Manager of Infineon’s RF Engine business unit. “By reusing the core IP from our successful GPRS transceivers SMARTi SD and SD2 and leveraging from our CMOS process experience we could significantly speed up development time and offer faster time-to-market for our customers. With the SMARTi PM, Infineon once again underlines its technology leadership in RF transceivers.”
With the SMARTi PM a new digital transceiver concept is introduced, perfectly fitting to the characteristics of the 0.13-µm CMOS technology. The transceiver provides an analogue I/Q base band interface, a Zero IF direct conversion receiver and a quadband Polar Modulator for EDGE with integrated PGA (Programmable Gain Amplifier) functionality. Based on its standard I/Q interface the SMARTi PM can be combined with all major EDGE base band chips. It will operate with a standard linear power amplifier, already available from multiple vendors.
SMARTi PM is entirely controllable through a 3-wire bus. In combination with Infineon’s S-GOLD2 (PMB 8876) base band chip and the SM-POWER-3 (PMB 6821) power management chip a compact 3-chip EDGE system approach is achieved resulting in a very small and cost-effective solution.
Availability
The SMARTi PM is manufactured in Infineon’s 0.13-µm CMOS process and currently available in sample quantities. Few selected customers are already working on designs for next-generation cell phones using the SMARTi PM. It operates at 2.8 V and 1.5 V and comes in a 40-pin green VQFN package (5.5 mm x 6.5 mm).
Related stories:
Infineon, Motorola to Develop 3G Radio Frequency Chip
Infineon Technologies AG today announced that it has signed an agreement with Motorola to develop a new multi-mode, single-chip 3G radio frequency (RF) transceiver based on Infineon’s SMARTi UE chip.
In Brief: Samsung to use Infineon chip in EDGE phone
Samsung has selected Germany's Infineon to supply radio frequency chips for its line of EDGE mobile phones, which will debut later this year.
World's Most Integrated GSM/GPRS Entry Phone Platform
Infineon Technologies AG (FSE/NYSE: IFX) today announced its E-GOLDradio™ chip, a GSM/GPRS single-chip which combines a quadband radio transceiver part with a base band processor. The E-GOLDradio enables the base band and RF functionality to be realized on a board space of less than 4 square centimetres which is about 30 percent less than the area previously occupied by two-chip solutions. Featuring E-GOLDradio, Infineon is able to provide the word's most integrated platform. The new BP3 platform comprises all hardware and software components necessary to design a mobile phone, such as power management, filter, power amplifier, memory as well as a GSM/GPRS protocol stack and application framework (APOXI) with a reference man-machine interface.
Infineon to Start Volume Shipments of Single Chip CMOS GSM/GPRS Radio Transceiver
Infineon Technologies AG, the industry leader in making radio frequency (RF) transceivers for mobile telephones, today announced that it had started volume shipments of its GSM/GPRS RF transceivers manufactured in standard CMOS technology to a tier 1 customer. The new SMARTi® SD is the world’s first single chip CMOS-based GSM/GPRS quad-band transceiver that is optimized for cost, size and power consumption. It integrates into one chip all the functions required by a GSM radio of today and tomorrow and enables global roaming, making possible small inexpensive devices that combine a mobile telephone with web browsing capabilities.
Infineon Makes UMTS Phones Usable Worldwide
New features such as fast data transmission and new applications like recording, sending and receiving video clips or receiving television while on the move are generally associated with the new
UMTS (Universal Mobile Telecommunications System) mobile radio standard. But "universal" does not automatically mean that a UMTS handset will also work anywhere in the world. A total of six frequency blocks have been defined for providing UMTS services worldwide. To make next-generation mobile phones “universal” in the truest sense of the word, Infineon Technologies AG recently introduced a new chip which accommodates the transmit and receive electronics for all six frequency bands in a footprint measuring only 5mm on 5mm. SMARTi 3G is the name of the smart chip, which Infineon unveiled this week at an industry conference in California.