[Home]
[Full version]
New SOI transistor developed beyond 65-nm technology nodes
Dec 29 ,Technology
20% increase in speed and 1/10 power reductions by employing back-bias control
Hitachi, Ltd. announced that it has developed a new
SOI (Silicon On Insulator)
*1) transistor which dramatically improves speed and lowers power consumption, for processes beyond 65-nm technology nodes, in conjunction with Renesas Technology Corp. The transistors fabricated on SOI layers which have aggressively scaled buried oxide layer,
*2) approximately 10 nm, achieved not only increase in the drive current by 20 % but also 1/10 reductions in power consumption by using wide-range back-bias control. This transistor is expected to become a fundamental CMOS device for low-power and high-performance applications beyond the 65-nm technology nodes.
The progress of system LSI performance has opened doors to increasing the functionality of cellular phones and is sustaining a rapidly expanding market. System-on-chip (SoC) performance is measured by factors such high-speed, as well as low-power consumption, which determines the battery life of cellular phones. CMOS devices, used in SoCs, have achieved these improvements by decreasing the scale of the gate-length. In 65-nm technology node, however, it will become increasingly difficult to dismiss the increases in power consumption resulting from an increase in leakage current due to short channel effect and process variations. Thus, it was necessary to develop a new transistor structure to simultaneously achieve high-speed operation and low-power consumption beyond 65-nm technology node LSIs.
In response to this challenge, Hitachi, in cooperation with Renesas Technology, designed and proposed a completely new concept SOI transistor, and confirmed its superior high-speed and low-power characteristics. Features of the technology are as below:
(1) SOI transistor using an ultra-thin buried insulating layer:
The thickness of the insulating layer of the proposed SOI transistor was aggressively thinned to about 10nm. With conventional transistors, the switching operation is carried out by applying a bias to gate electrodes formed during the semiconductor fabrication process. With the new transistors, however, as the buried insulating layer is extremely thin, when a bias is applied to the silicon substrate, the substrate acts as "a second gate". A major benefit of this is that the controllability of switching characteristics is improved.
(2) Metal-gate-electrode-structures-enabled tunable threshold voltage*3)technology:
Past SOI transistors had the merit of high-speed, but this was countered by the inability to set several threshold voltages - a necessity in SoCs. The tunable threshold voltage technology for transistors was developed by a combination of metal gate and threshold voltage adjustment ion implantation into the substrate beneath the ultra-thin buried insulating layer to achieve the desired threshold voltage.
The current-voltage characteristics of the prototype transistor was measured, and a 20% increase in drive current and one order of magnitude reduction in leak current were confirmed when the back-gate bias was applied. Further, the target threshold voltage for low-power applications were achieved by employing the developed tunable threshold voltage technology. The next step will be to further refine the technology as fundamental high-speed and low-power CMOS technology will become essential for high performance cellular phones.
These results were presented at the 2004 IEEE International Electron Devices Meeting, held in San Francisco, California, U.S.A., from 13th - 15th December 2004.
Technical Terms:
*1) SOI: Silicon-on-Insulator.
SOI is an advanced semiconductor substrate used to produce chips that deliver higher performance and use less power. SOI improves the transistors by providing an insulating layer in the silicon that isolates the transistor, allowing electrical current to flow through the circuitry more efficiently. The insulated transistor delivers higher performance and/or lower power requirements for the chip and, in turn, for the products made with the chip.
*2) Buried oxide layer:
Referred to as BOX (Buried Oxide) layer. The BOX layer is the insulating layer embedded in a substrate with SOI substrate. SiO2 is usually used for as an insulating material. From a viewpoint of parasitic capacitance reduction, about 100-200 nm-thick-BOX layers are employed in many cases.
*3) Threshold voltage:
Threshold voltage is one of the most important CMOS device parameter. This is defined by the voltage on which drain current begins to flow through the channel of the transistor at an ON state. At the usual bulk CMOS, this voltage is controlled by introduction of the impurities into a silicon substrate. However, SOI transistors have poor threshold voltage controllability because the impurity concentration which can be introduced for the case of SOI transistor is limited due to formed thin SOI layer.
Related stories:
IBM Alliances Announce Advancement in High-K/Metal Gate Technology
IBM and its joint development partners -- AMD, Chartered Semiconductor Manufacturing, Freescale, Infineon, and Samsung -- announced an innovative approach to speed the implementation of a breakthrough material known as "high-k/metal gate" in next generation 32 nanometer (32nm) computer chips.
IBM Reveals Breakthrough eDRAM Memory Technology
In papers presented at the International Solid State Circuits Conference, IBM revealed a first-of-its-kind, on-chip memory technology that features the fastest access times ever recorded in eDRAM (Embedded Dynamic Random Access Memory). IBM's new microchip technology will more than triple the amount of memory stored on chips and double the performance of computer processors. It will be available in 2008.
Renesas, Matsushita Develop Technique for Stablizing Operation of 45nm On-Chip SRAM
Renesas Technology and Matsushita Electric Industrial today announced the development of a technique that achieves stable operation with 45nm process generation bulk CMOS for SRAM (Static Random Access Memory) that can be embedded in SoC (system-on-a-chip) devices and microprocessors (MPUs).
AMO Manufactures First Graphene Transistors
In the scope of his innovative project ALEGRA the AMO nanoelectronics group of Dr. Max Lemme was able to manufacture top-gated transistor-like field-effect devices from monolayer graphene.
Light-emitting transistor uses light to transfer an electrical signal
In one of the early discoveries of the current "silicon electrophotonics era," scientists from Hitachi, Ltd. in Tokyo have built a light-emitting transistor (LET) that transfers, detects and controls an electrical signal all on a single nanometer-sized chip. Using a silicon-on-insulator (SOI) substrate, the group could optically connect the LET to a detector, resulting in a tiny chip that may integrate a wide range of microelectronics and photonics nano devices.
World's first MOSFETs with epitaxial Gd2O3
Researchers at AMICA and Technical University of Darmstadt have successfully fabricated the world's first MOSFETs on ultra-thin-body silicon-on-insulator (SOI) material and bulk silicon with a crystalline gadolinium oxide (Gd
2O
3) gate dielectric.
AMD, IBM Unveil New, Higher Performance, More Power Efficient 65nm Process Technologies
In papers presented at the International Electron Devices Meeting (IEDM) in Washington, D.C., IBM and AMD today detailed their progress in bringing new, advanced semiconductor process technologies and materials to the 65 nanometer technology generation.
NEC's Breakthrough to Enhance Functionality of Sub-10nm Transistors
NEC today announced the development of new breakthrough device technology for low-power, high performance system LSI. Based on the ultimate scaling of conventional bulk planar MOSFETs, the new technology is capable of improving on-off ratio, enhancing the functionality of sub-10nm planar bulk transistors.
[Home]
[Full version]