Physicist Bram Hoex and colleagues at Eindhoven University of Technology, together with the Fraunhofer Institute in Germany, have improved the efficiency of an important type of solar cell from 21.9 to 23.2 percent (a relative improvement of 6 per cent). This new world record is being presented on Wednesday May 14 at a major solar energy conference in San Diego.
The efficiency improvement is achieved by the use of an ultra-thin aluminum oxide layer at the front of the cell, and it brings a breakthrough in the use of solar energy a step closer.
An improvement of more than 1 per cent (in absolute terms) may at first glance appear modest, but it can enable solar cell manufacturers to greatly increase the performance of their products. This is because higher efficiency is a very effective way of reducing the cost price of solar energy. The costs of applying the thin layer of aluminum oxide are expected to be relatively low. This will mean a significant reduction in the cost of producing solar electricity.
Hoex was able to achieve the increase in efficiency by depositing an ultra-thin layer (approximately 30 nanometer) of aluminum oxide on the front of a crystalline silicon solar cell. This layer has an unprecedented high level of built-in negative charges, through which the – normally significant – energy losses at the surface are almost entirely eliminated. Of all sunlight falling on these cells, 23.2 per cent is now converted into electrical energy. This was formerly 21.9 per cent, which means a 6 per cent improvement in relative terms.
Hoex gained his PhD last week at the Applied Physics department of the TU/e with this research project. He was supported in the Plasma & Materials Processing (PMP) research group by professor Richard van de Sanden and associate professor Erwin Kessels. This group specializes in plasma deposition of extremely thin layers. The Dutch company OTB Solar has been a licensee of one of these processes since 2001, which it is using in its solar cell production lines. Numerous solar cell manufacturers around the world use equipment supplied by OTB Solar.
The ultra-thin aluminum oxide layer developed in the PMP group may lead to a technology innovation in the solar cell world. A number of major solar cell manufacturers have already shown interest.
Solar cells have for years looked like a highly promising way to partly solve the energy problem. The sun rises day after day, and solar cells can conveniently be installed on surfaces with no other useful purpose. Solar energy also offers opportunities for use in developing countries, many of which have high levels of sunshine.
Within ten to fifteen years the price of electricity generated by solar cells is expected to be comparable to that of ‘conventional’ electricity from fossil fuels. This technology breakthrough now brings the industrial application of this type of high-efficiency solar cell closer.
Source: Eindhoven University of Technology
Related stories:
Sharp Unveils Solar-Powered TV
For the 1.6 billion people living in areas without utility-supplied electricity, Sharp has designed a TV that can get 100% of its power from the sun. The company plans to exhibit the 26-inch LCD prototype at the Hokkaido Toyako Summit, or G8 Summit, in Hokkaido, Japan, on July 7-9.
Breakthrough in efficiency for dye-sensitized solar cells
In a paper published in the journal
Nature Materials, EPFL professor Michael Graetzel, Shaik Zakeeruddin and colleagues from the Changchun Institute of Applied Chemistry at the Chinese Academy of Sciences have achieved a record light conversion efficiency of 8.2% in solvent-free dye-sensitized solar cells.
Space science simulation at UNH now better, faster, cheaper
Cashing in on the underlying technology that seamlessly renders graphics for state-of-the-art video games, space scientists at the University of New Hampshire have bundled together 40 PlayStation3 consoles to affordably simulate one of the "grand challenges" of modern computational science - the interaction between Earth's magnetic field or "magnetosphere" and the solar wind. Climate change is another supercomputing grand challenge.
Perfecting a solar cell by adding imperfections
Nanotechnology is paving the way toward improved solar cells. New research shows that a film of carbon nanotubes may be able to replace two of the layers normally used in a solar cell, with improved performance at a lower cost. Researchers have found a surprising way to give the nanotubes the properties they need: add defects.
Brightest X-ray Vision at the Nano-scale
Technology-development studies at Cornell University and Jefferson Laboratory are showing how to use the brightest X-ray light ever generated for the scientific examination of everything from human proteins to forged art.
Getting wrapped up in solar textiles
Sheila Kennedy, an expert in the integration of solar cell technology in architecture who is now at MIT, creates designs for flexible photovoltaic materials that may change the way buildings receive and distribute energy.
Inflatable electric car can drive off cliffs
It's hard to say what the most intriguing thing about XP Vehicles' inflatable car is. Maybe it's that the car can travel for up to 2,500 miles on a single electric charge (the distance across the US is roughly 3,000 miles).
IBM Research Unveils Breakthrough In Solar Farm Technology
IBM today announced a research breakthrough in photovoltaics technology that could significantly reduce the cost of harnessing the Sun's power for electricity.