Popcorn-ball design doubles efficiency of dye-sensitized solar cells

A new approach creates a dramatic improvement in cheap solar cells now being developed in laboratories.

By using a popcorn-ball design – tiny kernels clumped into much larger porous spheres – researchers at the University of Washington are able to manipulate light and more than double the efficiency of converting solar energy to electricity. The findings will be presented today in New Orleans at the national meeting of the American Chemical Society.

"We think this can lead to a significant breakthrough in dye-sensitized solar cells," said lead author Guozhong Cao, a UW professor of materials science and engineering.

Dye-sensitized solar cells, first popularized in a scientific article in 1991, are more flexible, easier to manufacture and cheaper than existing solar technologies. Researchers have tried various rough surfaces and achieved higher and higher efficiencies. Current lab prototypes can convert just over one tenth of the incoming sun's energy into electricity. This is about half as efficient as the commercial, silicon-based cells used in rooftop panels and calculators.

The UW researchers did not attempt to maximize the overall efficiency of a dye-sensitized solar cell to match or beat these previous records. Instead, they focused on developing new approaches and compared the performance of a homogeneous rough surface with a clumping design. One of the main quandaries in making an efficient solar cell is the size of the grains. Smaller grains have bigger surface area per volume, and thus absorb more rays. But bigger clumps, closer to the wavelength of visible light, cause light to ricochet within the thin light-absorbing surface so it has a higher chance of being absorbed.

"You want to have a larger surface area by making the grains smaller," Cao said. "But if you let the light bounce back and forth several times, then you have more chances of capturing the energy."

Other researchers have tried mixing larger grains in with the small particles to scatter the light, but have little success in boosting efficiency. The UW group instead made only very tiny grains, about 15 nanometers across. (Lining up 3,500 grains end to end would equal the width of a human hair.) Then they clumped these into larger agglomerations, about 300 nanometers across. The larger balls scatter incoming rays and force the light to travel a longer distance within the solar cell. The balls' complex internal structure, meanwhile, creates a surface area of about 1,000 square feet for each gram of material. This internal surface is coated with a dye that captures the light.

The researchers expected some improvement in the performance but what they saw exceeded their hopes.

"We did not expect the doubling," Cao said. "It was a happy surprise."

The overall efficiency was 2.4 percent using only small particles, which is the highest efficiency achieved for this material. With the popcorn-ball design, results presented today at the conference show an efficiency of 6.2 percent, more than double the previous performance.

"The most significant finding is the amount of increase using this unique approach," Cao said.

The experiments were performed using zinc oxide, which is less stable chemically than the more commonly used titanium oxide but easier to work with.

"We first wanted to prove the concept in an easier material. Now we are working on transferring this concept to titanium oxide," Cao said. Titanium oxide based dye-sensitized solar cells are now at 11 percent maximum efficiency. Cao hopes his strategy could push dye-sensitized solar cells' efficiency significantly over that threshold.

Source: University of Washington

Related stories:

Researchers achieve dramatic increase in thermoelectric efficiency
Researchers at Boston College and MIT have used nanotechnology to achieve a major increase in thermoelectric efficiency, a milestone that paves the way for a new generation of products — from semiconductors and air conditioners to car exhaust systems and solar power technology — that run cleaner.
New biofuels process promises to meet all US transportation needs
Purdue University chemical engineers have proposed a new environmentally friendly process for producing liquid fuels from plant matter - or biomass - potentially available from agricultural and forest waste, providing all of the fuel needed for "the entire U.S. transportation sector."
Nano World: Black silicon for solar power
Silicon surfaces rendered black by pits and bumps only nanometers or billionths of a meter large could in the future help make solar power cells more efficient.
Nano World: Metal foams for catalysis
Metal foams made of grains and pores only nanometers or billionths of a meter wide are lighter than Styrofoam, enough to float on water. The extraordinarily high surface areas these unprecedented foams possess suggest they could serve as excellent platforms for chemical reactions that for instance help generate electricity or remove pollutants, experts told UPI's Nano World.
Distant ball of dust not dusty enough
One of the youngest supernova remnants known, a glowing red ball of dust created by the explosion 1,000 years ago of a supermassive star in a nearby galaxy, the Small Magellanic Cloud, exhibits the same problem as exploding stars in our own galaxy: too little dust.
Public to look for dust grains in Stardust detectors
Astronomy buffs who jumped at the chance to use their home computers in the SETI@home search for intelligent life in the universe will soon be able to join an Internet-based search for dust grains originating from stars millions of light years away.
ESO's Very Large Telescope Obtains Unique Spectrum of a Meteor
While observing a supernova in a distant galaxy with the FORS instrument on ESO's Very Large Telescope at the Paranal Observatory (Chile), astronomers were incredibly lucky to obtain serendipitously a high quality spectrum of a very large meteor in the terrestrial atmosphere.

The VLT spectrograph provided a well calibrated spectrum, making it a reference in this field of research. From this spectrum, the temperature of the meteor trail was estimated to be about 4600 degrees centigrade.
Building a better telecom system
Hurricane Katrina helped University of Texas professor, Alexis Kwasinski, formulate a new plan for the U.S. telecom system: a de-centralized power architecture that would have kept the lights and phones on in New Orleans. Kwasinski maintains that a microgrid-based power plant with its own local power sources and independent control would be more dependable, efficient, and cost effective than traditional telecom power systems. Microgrids would also be a quick and inexpensive way to include renewable energy sources for both existing and developing systems.

News discussion:

Nanotechnology news