New research reveals subtlety of superconductivity

Superconductivity is the loss of all resistance to the flow of electric current at very low temperature, a surprising phenomenon with the potential to save enormous quantities of energy if it can be applied to the electric power grid. Twenty years ago, a new class of materials that superconduct at dramatically higher temperature, up to 164 K (about 165 below zero F), was discovered, promising widespread energy-saving applications. Most of these superconductors are “hole-doped,” so named because their superconductivity is triggered by removing electrons (adding “holes”) to an insulating magnetic compound. A few of the high-temperature superconductors, however, are “electron-doped,” requiring the addition of electrons to produce superconductivity.

The mystery of these electron-doped superconductors is that in addition to electron doping, they must be heated to high temperature during their manufacture to enable them to superconduct. No one could understand why the heat treatment was necessary; it did not seem to alter the structure or composition of the material, yet it dramatically transformed the material from an insulator to a superconductor.

“Our discovery opens the door to understanding how electron-doped superconductors work,” said Stephan Rosenkranz, an Argonne scientist on the experimental team. “We didn't realize the interplay of structure and superconductivity was so subtle. But now that we know what is good for superconductivity, we can vary the amount of the good and bad stuff in systematic ways to find out what makes them tick.”

The research team lead by scientists from Argonne, the University of Tennessee, and Brigham Young University found that heating the electron-doped superconductor Pr_1-xLaCe_xCuO₄ repaired subtle flaws in the microscopic structure of the material. These flaws are so delicate that their repair by heating escaped detection for nearly two decades. The Argonne team found them by effectively looking with two magnifying glasses. They correlated measurements of copper atom positions, using X-rays at the Advanced Photon Source (APS) at Argonne, with measurements of the oxygen atom positions by neutrons at the National Institute for Standards and Technology Center for Neutron Research.

The combination of these two measurements revealed a small change in the placement of both copper and oxygen atoms taking place during the heat treatment, leading to a perfect structure and superconductivity. Furthermore, the change is fully reversible: The material could be cycled from the flawed to the perfect structure, switching the superconductivity off or on.

The X-ray experiments for this work were led by Rosenkranz and Argonne's Peter Chupas and Peter Lee. They used the high-intensity X-ray beams produced by the APS to determine the precise location and type of each atom in the crystal structure. Branton Campbell, another member of the research team and former postdoctoral researcher at Argonne, now at Brigham Young University, compared this technique to putting an object on a table, hitting it with baseballs thrown from different angles, and then using the marks left where the bounced balls struck the surrounding walls to figure out what the object looks like. Other members of the experimental team include Pengcheng Dai from the University of Tennessee and Oak Ridge National Laboratory, Hye-Jung Kang, now at the National Institute of Standards and Technology, and scientists from Tokyo's Central Research Institute of Electric Power Industry, who made the samples.

The detailed results of these findings were published in the Nature Materials paper "Microscopic Annealing Process and its Impact on Superconductivity in T'-Structure Electron-Doped Copper Oxides," which is available online. Funding for this research was provided by the U.S. Department of Energy's Office of Basic Energy Science, the U.S. National Science Foundation and the Japan Society for the Promotion of Science.

Source: Argonne National Laboratory

Researchers Study Superconductivity, Magnetism in Novel Material
A University of Arkansas physics professor and his colleagues have created a nanoscale structure that contains both magnetic and superconducting properties at the same time, and they will be exploring the properties of this novel material this summer in Switzerland.
New magnetic polymers may advance spintronics technologies
Researchers at the U.S. Department of Energy's Argonne National Laboratory have pioneered a new approach for making magnetic polymers that are held together with very strong hydrogen bonds. These polymers contain an innovative bifluoride, HF₂–, building block that allows a magnetically ordered state to be obtained. The development may help lead to new techniques for faster and more versatile computer chips, among other applications.
Advance hastens practicality of superconductivity
Nobody completely understands superconductors. So fathom how James S. Schilling, Ph.D., led a team that makes the phenomenon work better. Schilling, a professor of physics in Arts & Sciences at Washington University in St. Louis, collaborated with recent doctoral graduate Takahiro Tomita and scientists at Argonne (Ill.) National Laboratory to determine whether one region in superconductors, called grain boundaries (GB), are oxygen deficient. Such oxygen deficiency impairs superconductor performance.
First vortex 'chains' observed in engineered superconductor
They look like tiny swirling dust devils on the surface of the superconductor: "vortices" that appear where magnetic fields interact with the material. Unlike harmless dust devils, however, vortices can sap a superconductor's ability to transmit current without resistance.
Iron-based Materials May Unlock Superconductivity's Secrets
(PhysOrg.com) -- Researchers at the National Institute of Standards and Technology (NIST) are decoding the mysterious mechanisms behind the high-temperature superconductors that industry hopes will find wide use in next-generation systems for storing, distributing and using electricity. In two new papers on a recently discovered class of high-temperature superconductors, they report that the already complicated relationship between magnetism and superconductivity may be more involved than previously thought, or that a whole new mechanism may drive some types of superconductors.
Researchers team up to probe iron-arsenic superconductors with new instrument
Researchers at the U.S. Department of Energy's Ames Laboratory are part of collaborative team that's used a brand new instrument at the DOE's Spallation Neutron Source to probe iron-arsenic compounds, the "hottest" new find in the race to explain and develop superconducting materials. Rob McQueeney, an Ames Laboratory physicist, was part of that team whose findings, published in the Oct. 10 issue (101) of Physical Review Letters, mark the first research produced with the aid of the new tool.
Magnetism and Superconductivity Observed to Exist in Harmony
(Physorg.com) -- Physicists at Los Alamos National Laboratory, along with colleagues at institutions in Switzerland and Canada, have observed, for the first time in a single exotic phase, a situation where magnetism and superconductivity are necessary for each other's existence.
'Single-Crystal' Superconductors are a Big Step for the Field
(PhysOrg.com) -- In key advances for the field of superconductivity, a research group has created versions of a class of widely studied superconducting compounds that are each one continuous crystal, rather than composed of many crystalline grains. These single-crystal materials are important achievements because they display better properties than polycrystalline types and are easier to study.

New research reveals subtlety of superconductivity

Related stories:

News discussion: