MIT creates new oil-repelling material

MIT engineers have designed the first simple process for manufacturing materials that strongly repel oils. The material, which can be applied as a flexible surface coating, could have applications in aviation, space travel and hazardous waste cleanup.

For example, the material could be used to help protect parts of airplanes or rockets that are vulnerable to damage from being soaked in fuel, such as rubber gaskets and o-rings.

“These are vulnerable points in many aerospace applications” said Robert Cohen, the St. Laurent Professor of Chemical Engineering and an author of a paper on the work that will appear in the Dec. 7 issue of Science.

“It would be nice if you could spill gasoline on a fabric or a gasket or other surface and find that instead of spreading, it just rolled off,” Cohen said.

Creating a strongly oil-repelling, or “oleophobic” material, has been challenging for scientists, and there are no natural examples of such a material.

“Nature has developed a lot of methods for waterproofing, but not so much oil-proofing,” said Gareth McKinley, MIT School of Engineering Professor of Teaching Innovation in the Department of Mechanical Engineering and a member of the research team. “The conventional wisdom was that it couldn't be done on a large scale without very special lithographic processes.”

The tendency of oils and other hydrocarbons to spread out over surfaces is due to their very low surface tension (a measure of the attraction between molecules of the same substance).

Water, on the other hand, has a very high surface tension and tends to form droplets. For example, beads of water appear on a freshly waxed car (however, over a period of time, oil and grease contaminate the surface and the repellency fades). That difference in surface tension also explains why water will roll off the feathers of a duck, but a duck coated in oil must be washed with soap to remove it.

The MIT team overcame the surface-tension problem by designing a material composed of specially prepared microfibers that essentially cushion droplets of liquid, allowing them to sit, intact, just above the material's surface.

When oil droplets land on the material, which resembles a thin fabric or tissue paper, they rest atop the fibers and pockets of air trapped between the fibers. The large contact angle between the droplet and the fibers prevents the liquid from touching the bottom of the surface and wetting it.

The microfibers are a blend of a specially synthesized molecule called fluoroPOSS, which has an extremely low surface energy, and a common polymer. They can be readily deposited onto many types of surfaces, including metal, glass, plastic and even biological surfaces such as plant leaves, using a process known as electrospinning.

The researchers have also developed some dimensionless design parameters that can predict how stable the oleophobicity or oil-resistance between a particular liquid and a surface will be. These design equations are based on structural considerations, particularly the re-entrant nature (or concavity) of the surface roughness, and on three other factors: the liquid's surface tension, the spacing of the fibers, and the contact angle between the liquid and a flat surface.

Using these relationships, the researchers can design fiber mats that are optimized to repel different hydrocarbons. They have already created a non-woven fabric that can separate water and octane (jet fuel), which they believe could be useful for hazardous waste cleanup.

The Air Force, which funded the research and developed the fluoroPOSS molecules, is interested in using the new material to protect components of airplanes and rockets from jet fuel.

Source: Massachusetts Institute of Technology

Related stories:

Nanotech process produces plastics that are 10 times more stretchable
Move over, Rumplestiltskin. Researchers in China report the first successful “electrospinning” of a type of plastic widely used in automobiles and electronics. The high-tech process, which uses an electric charge to turn polymers into thin fibers in the presence of electricity, produced plastic mats that can stretch 10 times more without breaking than the original material and could lead to new uses for the plastic, they say. Their study is scheduled for the June 10 issue of ACS’ Macromolecules.
Protein Fibrils as Alternative Plastics?
Amyloid deposits in tissues and organs are linked to a number of diseases, including Alzheimer’s, Parkinson’s, type II diabetes, and prion diseases such as BSE. However, amyloids are not just pathological substances; they have potential as a nanomaterials.
Engineers 'bone' up on biological materials
In a recent feature article published in Materials Research Society's Bulletin, Dr Michelle Oyen explores the potential uses of synthetic bone-like material. Michelle suggests that these materials will be too expensive to replace materials in typical construction and building applications but can be developed for use in particularly demanding sections of advanced architecture as well as other specialist structural applications.
'Sticky nanotubes' hold key to future technologies
Researchers at Purdue University are the first to precisely measure the forces required to peel tiny nanotubes off of other materials, opening up the possibility of creating standards for nano-manufacturing and harnessing a gecko's ability to walk up walls.
URI analysis of rare textiles from Honduras ruins suggests Mayans produced fine fabrics
Very few textiles from the Mayan culture have survived, so the treasure trove of fabrics excavated from a tomb at the Copán ruins in Honduras since the 1990s has generated considerable excitement.
From cartilage to fruit-fly wings, physicist studies 'squishiness' in everyday things
Cartilage is essential to movement in the human body, cushioning bones and joints, while retaining its shape despite a lot of pressure, poking and prodding. Unfortunately, it also often starts breaking down after 60 or so years, leading to such conditions as osteoarthritis and painful inflammations.
Finding ingenious design in nature
“This,” Joanna Aizenberg says slyly, picking up a latticed tube from her desk in Pierce Hall, “is a glass house you can throw stones at.”
Engineers create new adhesive that mimics gecko toe hairs
A new anti-sliding adhesive developed by engineers at the University of California, Berkeley, may be the closest man-made material yet to mimic the remarkable gecko toe hairs that allow the tiny lizard to scamper along vertical surfaces and ceilings.

News discussion:

Physics news