Surface dislocation nucleation: Strength is but skin deep at the nanoscale

For centuries, engineers have bent and torn metals to test their strength and ductility. Now, materials scientists at the University of Pennsylvania School of Engineering and Applied Science are studying the same metals but at nanoscale sizes in the form of wires a thousand times thinner than a human hair.

This work has enable Penn engineers to construct a theoretical model to predict the strength of metals at the nanoscale. Using this model, they have found that, while metals tend to be stronger at nanoscale volumes, their strengths saturate at around 10-50 nanometers diameter, at which point they also become more sensitive to temperature and strain rate. Such prediction of different strength regimes of nano-solids is important for future application and engineering design of nanotechnology.

Such small-volume materials with relatively large surface areas are now routinely employed in microchips and nanoscience and technology, and their mechanical properties can differ vastly from their macroscale counterparts. Typically, smaller is stronger. A gold wire 200 nanometers in diameter can be 50 times stronger per area than centimeter-sized single-crystal gold. Engineers investigated the "smaller is stronger" trend.

Ju Li, an associate professor in the Department of Materials Science and Engineering at Penn, and his collaborators at the Georgia Institute of Technology have combined transition state theory, explicit atomistic energy landscape calculation and computer simulation to establish a theoretical framework to predict the strengths of small-volume materials. Unlike previous models, their prediction can be directly compared with experiments performed at realistic temperature and loading rates. This research appeared as a cover article in Volume 100 of Physical Review Letters.

Their study demonstrated that the free, exterior surface of nanosized materials can be fertile breeding grounds of dislocations at high stresses. Dislocations are string-like defects whose movements give rise to plastic flow, or shape change, of solids. In large-volume materials, it is easy for dislocations to multiply and entangle and to maintain a decent population inside; however, in small-volume materials, dislocations could show up and then exit the sample, one at a time. To initiate and sustain plastic flow in this case, dislocations need to be frequently nucleated fresh from the surface.

Since surface is itself a defect, researchers asked to what degree the measured strength of a small-volume material reflects surface properties and surface-mediated processes, particularly when the sample size is in the range of tens of nanometers. Li and his team modeled tiny bits of gold and copper to investigate the probabilistic nature of surface dislocation nucleation. The study showed that the activation volume associated with surface dislocation nucleation is characteristically in the range of 1–10 times the atomic volume, much smaller than that of many conventional dislocation processes. Small activation volumes will lead to sensitive temperature and strain-rate dependence of the critical stress, providing an upper bound to the size-strength relation.

From this, the team predicted that the "smaller is stronger" trend will saturate at wire diameters 10-50 nanometers for most metals. For comparison, computers now contain microchips with 45 nanometer strained silicon features. Associated with this saturation in strength is a transition in the rate-controlling mechanism, from collective dislocation dynamics to single dislocation nucleation.

Source: University of Pennsylvania

Related stories:

Scientists determine strength of 'liquid smoke' with 3D images
(PhysOrg.com) -- Researchers have created a 3D image of a material referred to as "liquid smoke." Aerogel, also known as liquid smoke or "San Francisco fog," is an open-cell polymer with pores smaller than 50 nanometers in diameter.
Engineers Prove Graphene is the Strongest Material
(PhysOrg.com) -- Research scientists at Columbia University’s Fu Foundation School of Engineering and Applied Science have achieved a breakthrough by proving that the carbon material graphene is the strongest material ever measured.
A Telescope Made of Moondust
A gigantic telescope on the Moon has been a dream of astronomers since the dawn of the space age. A lunar telescope the same size as Hubble (2.4 meters across) would be a major astronomical research tool. One as big as the largest telescope on Earth—10.4 meters across—would see far more than any Earth-based telescope because the Moon has no atmosphere. But why stop there? In the Moon's weak gravity, it might be possible to build a telescope with a mirror as large as 50 meters across, half the length of a football field—big enough to analyze the chemistry on planets around other stars for signs of life.
A novel X-ray source could be brightest in the world
Oscillator projected to increase current brightness by millions of times
The future of high-intensity x-ray science has never been brighter now that scientists at U.S. Department of Energy's Argonne National Laboratory have devised a new type of next generation light sources.
Space radar to improve miners' safety
Advanced ground penetration radar, originally developed to investigate the soil structure on the Moon and other planets on ESA planetary missions, is now being used in Canadian mines to spot hidden cracks and weaknesses in mine roofs.
Nanoparticles aid bone growth
In the first study of its kind, bioengineers and bioscientists at Rice University and Radboud University in Nijmegen, Netherlands, have shown they can grow denser bone tissue by sprinkling stick-like nanoparticles throughout the porous material used to pattern the bone.
Can silver nanoparticles be the key to a more compact laser?
“In random media, multiple scattering and interference reduce the diffusion of light, and in case of extremely strong scattering, photon localization, or Anderson localization of light, is predicted like electrons in glasses,” Katsuhisa Tanaka, a scientist in Kyoto University, tells PhysOrg.com. He and his colleagues are interested in using so-called disordered material to create lasers that could increase our understanding of physics – as well as make the laser creation process simpler.
Research Suggests Novel Superconductor Is In a Powerful Class All Its Own
Superconductivity has perplexed, astounded and inspired scientists ever since it was discovered in 1911. Now, in the latest of a century of surprises, researchers at the National High Magnetic Field Laboratory at Florida State University have discovered unusual properties in a novel superconducting material that point to an entirely new kind of superconductor.

News discussion:

Nanotechnology news