Terahertz radiation falls between microwaves and infrared radiation on the electromagnetic spectrum, with frequencies from about 300 million cycles per second to about 3 trillion cycles per second. Biological and chemical samples naturally emit characteristic signatures of terahertz radiation, but detecting and measuring them is a unique challenge because the signals are weak and absorbed rapidly by the atmosphere.
The NIST prototype imager, described in detail for the first time in a new paper, uses an exquisitely sensitive superconducting detector combined with microelectronics and optics technologies to operate in the terahertz range. The NIST system has its best resolution centered around a frequency of 850 gigahertz, a “transmission window” where terahertz signals can pass through the atmosphere. The system can detect temperature differences smaller than half a degree Celsius, which helps to differentiate between, for example, tumors and healthy tissue.
The heart of the system is a tiny device that measures incoming terahertz radiation by mixing it with a stable internal terahertz signal. This mixing occurs in a thin-film superconductor, which changes temperature upon the arrival of even a minute amount of radiation energy. The slight frequency difference between the two original terahertz signals produces a more easily detected microwave frequency signal.
NIST developed the device and antenna, combined with an amplifier on a chip smaller than a penny, in collaboration with the University of Massachusetts. Called a hot electon bolometer (HEB), the technology is sensitive enough to detect the weak terahertz signals naturally emitted by samples, eliminating the need to generate terahertz radiation to actively illuminate the samples. This greatly reduces complexity and minimizes safety concerns. In addition, the NIST “mixer” system delivers more information by detecting both the magnitude and phase (the point where each individual wave begins) of the radiation.
Because passively emitted signals are so weak, the current system takes about 20 minutes to make a single 40 x 40 pixel image. NIST researchers are working on an improved version that will scan faster and operate at two frequencies at once. Future systems also should be able to achieve better spatial resolution.
Citation: E. Gerecht, D. Gu, L. You and S. Yngvesson. Passive heterodyne hot electron bolometer imager operating at 850 GHz. Forthcoming in IEEE Transactions on Microwave Theory and Techniques.
Source: National Institute of Standards and Technology
Related stories:
Chasing rainbows
Engineers working in optical communications bear more than a passing resemblance to dreamers chasing rainbows. They may not wish literally to capture all the colors of the spectrum, but they do seek to control the rate at which light from across the spectrum moves through optical circuits.
How to make microwaves on a chip to replace X-rays for medical imaging and security
Is microwave radiation the nondestructive imaging technology of the future? Microwaves with frequencies from a few hundred gigahertz (GHz) up to slightly over 1 terahertz (THz), penetrate just a short distance into surfaces without the ionizing damage caused by X-rays. The technology could be used to detect skin cancer or image dental flaws beneath the enamel. It could also be a valuable tool for airport security, to detect objects hidden under clothing.
Harnessing new frequencies: Far infrared can be used faster wireless
Modern technology uses many frequencies of electromagnetic radiation for communication, including radio waves, TV signals, microwaves and visible light. Now, a University of Utah study shows how far-infrared light – the last unexploited part of the electromagnetic spectrum – could be harnessed to build much faster wireless communications and to detect concealed explosives and biological weapons.
Toward Terahertz Detectors on a Single, Conventional Chip
Sensors and detectors that would work in the terahertz range of the electromagnetic spectrum promise a range of tantalizing properties, from precise identification of concealed weapons to the ability to distinguish between different tissue types for disease screening. But because signals in the terahertz range have traditionally been incompatible with conventional microelectronics, this potential has been slow to realize.
Unexpected Plasmonic Discovery: Terahertz Waves Travel Slower When Sent Down Smaller Wires
Frequently, the unexpected results in science are the most exciting. That's the case with the latest findings from the lab of Rice University's electrical engineer Daniel Mittleman, who was trying to find new ways to use terahertz energy, or T-rays, for chemical sensing when he noticed a strange tendency of the signals to travel slower if they were sent down smaller metal wires.
Quantum Physics Discovery May Bring About Changes in Optical Communication
Results from experiments conducted at the University of California, Santa Barbara may lead to profound changes in optical communications. The discovery is reported in the October 28th edition of the journal
Science.
Shimmering ferroelectric domains
Ferroelectric materials are named after ferromagnetic ones because they behave in a similar way. The main difference: these materials are not magnetic, but permanently electrically polarized. They have great importance for data storage technology and novel piezoelectric devices. Dresden scientists were able to produce microscopic images of ferroelectric domains - tiny regions of a ferroelectric material -, where the electric polarization points into different directions. These results were published in the journal
Physical Review Letters recently.
Visualizing atomic-scale acoustic wavesin nanostructures
Acoustic waves play many everyday roles - from communication between people to ultrasound imaging. Now the highest frequency acoustic waves in materials, with nearly atomic-scale wavelengths, promise to be useful probes of nanostructures such as LED lights. However, detecting them isn't so easy.
