Due to their stable design, Fizeau interferometers are used to determine the topography of surfaces such as, e.g., plane surfaces. PTB (Physikalisch-Technische Bundesanstalt, Germany) has now developed a method which makes it possible to analyse surfaces with different reflectivities in a simple way. This method can also be extended to dynamic measurements.
Fizeau interferometers generate an interference between the surface of a test sample and a reference surface that is brought close to the test sample. The interference image is recorded and analysed by an imaging optics system. The contrast and the shape of the interference signals depend, however, on the reflectivity of the test samples. The time and effort required for measuring and analysing the topographies of differently reflecting test pieces is therefore significantly increased.
The method of separating the wavefronts of the reference surface and the test sample surface in the plane of the reference surface – for which a patent has been applied for – uses a new generation of commercially available beam splitters, also called "on-axis beam splitters", which cause a separation of the polarisation directions of the incident light along the optical axis.
In comparison with common Fizeau interferometers, this has various advantages. On the one hand, through the generation of polarised light, the measurement can be traced back to a pure two-beam interference. The analysis of the signal is thus significantly facilitated and improved. Classic Fizeau interferometers, however, are based on the analysis of the multiple-beam interference.
On the other hand, by varying the direction of polarisation, a maximum contrast can be set, independent of the reflectivity of the test sample. In contrast to this, in conventional Fizeau interferometers, different reference surfaces with adapted reflectivity must be held available in case the reflectivity of the test samples varies strongly.
In order to increase the accuracy of analysis of common Fizeau interferometers, a variable phase is generated by varying mechanically the distance between the test sample and the reference surface (phase-shifter interferometry). Another advantage of the new method is that such a phase shifting becomes possible through the use of electro-optical components and thus without using mobile parts. Thanks to the increased measuring dynamics achieved in this way, it is, for example, possible to carry out topographical measurements in environments which are subjected to vibrational strain.
The new method allows a facilitated and improved analysis of the measurement data, requires only one calibrated reference surface instead of several, and opens up new possibilities of application in the field of dynamic interferometry. It is particularly suited for measurements on structured or unstructured surfaces with different reflectivities – especially in the optical and semiconductor industry.
Source: Physikalisch-Technische Bundesanstalt (PTB)
Related stories:
How foamy is spacetime?
Maybe not as foamy as some scientists thought, as a fresh look at a quasar first observed in 1998 by the Hubble Space Telescope (HST) shows. Physicists observed a diffraction pattern called an Airy ring around the image of a distant quasar-like object. This ring persuades physicists that the light from this distant object has traveled through a relatively calm – rather than extremely frothy – spacetime.
Finding rough spot in surface measurement
For makers of computers, disk drives and other sophisticated technologies, a guiding principle is the smoother the surfaces of chips and other components, the better these devices and the products, themselves, will function.
Robot Scout: Fly Me (Safely) to the Moon
The first attempt to land humans on the moon -- Apollo 11 -- was a triumph that almost ended in disaster. At just 400 feet from the lunar surface, with only about a minute's worth of fuel remaining, astronauts Neil Armstrong and Edwin "Buzz" Aldrin saw that their ship's computer was taking them directly into a crater the size of a football field, strewn with SUV-sized boulders. They quickly took control from the computer, flew over the crater and touched down in a smoother area beyond, cutting the engine with just 30 seconds of fuel on the readout.
Scientists Test 'Artificial Upwelling' to Learn More About Complex Ocean Ecosystem Behavior
(PhysOrg.com) -- A team of scientists is studying the complex ocean upwelling process by mimicking nature – pumping cold, nutrient-rich water from deep within the Pacific Ocean and releasing it into surface waters near Hawaii that lack the nitrogen and phosphorous necessary to support high biological production.
Last-ever look at ESA's gravity satellite GOCE
(PhysOrg.com) -- As preparations for the launch of GOCE on 10 September continue on schedule, an important milestone has just been achieved as engineers at the Plesetsk Cosmodrome in northern Russia say farewell to the satellite as it is encapsulated in the two half-shells of the launcher's fairing.
Closest Look Ever at the Edge of a Black Hole
(PhysOrg.com) -- Astronomers have taken the closest look ever at the giant black hole in the center of the Milky Way. By combining telescopes in Hawaii, Arizona, and California, they detected structure at a tiny angular scale of 37 micro-arcseconds - the equivalent of a baseball seen on the surface of the moon, 240,000 miles distant. These observations are among the highest resolution ever done in astronomy.
Complex ocean behavior studied with 'artificial upwelling'
A team of scientists is studying the complex ocean upwelling process by mimicking nature – pumping cold, nutrient-rich water from deep within the Pacific Ocean and releasing it into surface waters near Hawaii that lack the nitrogen and phosphorous necessary to support high biological production.
Jules Verne prepares for ISS departure
(PhysOrg.com) -- In just a few days time, the historical Jules Verne mission will draw to an end. After the ATV Control Centre commands the opening of the Automated Transfer Vehicle hooks, ESA's first resupply and reboost vehicle will perform a fully automated undocking with the International Space Station on 5 September at 23:30 CEST (21:30 UT).
