Expedition 16 Completes Spacewalk

They completed scheduled tasks and did three get-ahead jobs in the spacewalk, which began about 50 minutes early.

After leaving the Quest airlock and setting up tools and equipment, Whitson removed, vented and stowed an ammonia jumper, part of a temporary cooling loop. Removing it allowed the hookup of the permanent ammonia cooling loop on a fluid tray on the station's exterior.

Tani meanwhile retrieved a bag of tools left outside on the station during the Nov. 9 spacewalk by Whitson and Flight Engineer Yuri Malenchenko. Then he removed two fluid caps to prepare for connection of that permanent cooling loop.

Next he moved on to reconfigure a circuit that was used for a Squib firing unit, a small pyrotechnical device that freed a radiator on the Port 1 truss for its deployment last Thursday.

Much of the spacewalk was devoted to work with the Loop A fluid tray. That 300-pound, 18.5-foot tray was moved from its temporary position on the S0 truss, at the center of the station's main truss, to the Destiny Lab, atop the starboard avionics tray.

Tani joined Whitson at S0. They released the fluid tray and then moved it to Harmony. They used a kind of relay technique, one moving ahead and attaching tethers to be ready to receive the tray, then the other moving farther forward to take the next handoff.

Once they reached the installation point they bolted down the tray, then hooked up its six fluid line connections, two at S0, two at the tray and two in between.

Tani moved to his final task, on the port side of Harmony. There he mated 11 avionics lines. Whitson, meanwhile, configured heater cables, then mated electrical umbilicals by hooking up four electrical harnesses linking Pressurized Mating Adapter-2 at the outboard end of Harmony to station power.

As the spacewalk wound down, Tani completed the first get-ahead task, connecting five starboard avionics umbilicals to Harmony. He then joined Whitson for two other get-ahead jobs, connection of redundant umbilicals to PMA-2. Subsequently, both worked on connection of Station to Shuttle Power Transfer System cables to PMA-2.

The two spacewalkers did the standard cleanup process, then entered the airlock. The beginning of its repressurization marked the official end of the spacewalk. In the airlock, they did precautionary decontamination procedures after working around ammonia lines.

Another spacewalk by Whitson and Tani to complete the exterior hookup of Harmony is scheduled for Nov. 24.

Source: NASA

Saturday Spacewalk to Complete Harmony Hookup to Station
A 6-hour, 30-minute spacewalk by International Space Station Commander Peggy Whitson and Flight Engineer Dan Tani will continue the external outfitting of the Harmony node in its new position in front of the U.S laboratory Destiny.
Spacewalkers to Hook Up Harmony at its New Location
A 6-hour, 40-minute spacewalk by International Space Station Commander Peggy Whitson and Flight Engineer Dan Tani will begin the external outfitting of the Harmony node in its new position in front of the U.S laboratory Destiny.
Bushfires leave a bad taste for wine lovers
(PhysOrg.com) -- Australian winemakers are turning to the University of Adelaide to help identify grape varieties that are less susceptible to smoke from summer bushfires.
New treatment desensitizes children's allergies
One M&M, swallowed whole, and little Noelle's skin turned as red as a Cortland apple. A month later, after eating soy ice cream, the 2-year-old turned colors again and started drooling, prompting her mother to inject a syringe full of epinephrine into the child's leg.
Polarized light guides cholera-carrying midges that contaminate water supplies
Cholera is a major killer and since the first pandemic in the early 19th century it has claimed millions of lives. According to Amit Lerner from The Hebrew University of Jerusalem, Israel, the lethal infection is harboured by an equally infamous insect: chironomids (midges). Lerner explains that the females contaminate water sources with the deadly bacteria when laying their eggs.
All-in-one printer evolves: Does more, does better
Used to be that I'd avoid all-in-one consumer electronic products simply because they just weren't as good as the separate, standalone models. But that's changed, especially when it comes to computer peripherals. Take the printer for example. Or more specifically, let's take a look at Epson's latest offering in their all-in-one printers category, the Artisan 800.
Survey: Most effective dental braces are least attractive
When it comes to the attractiveness of orthodontic braces, less metal is better, according to a recent survey.
Care-O-bot 3: Always at your service
Who doesn’t long for household help at times? Service robots will soon be able to relieve us of heavy, dirty, monotonous or irksome tasks. Research scientists have now presented a new generation of household robots, the “Care-O-bot® 3”.

Expedition 16 Completes Spacewalk

Related stories:

News discussion: