Nanostructured composite material may replace depleted uranium

Armor-piercing projectiles made of depleted uranium have caused concern among soldiers storing and using them. Now, scientists at the U.S. Department of Energy's Ames Laboratory are close to developing a new composite with an internal structure resembling fudge-ripple ice cream that is actually comprised of environmentally safe materials to do the job even better.

Ames Laboratory senior scientist Dan Sordelet leads a research team that is synthesizing nanolayers of tungsten and metallic glass to build a projectile. "As the projectile goes further into protective armor, pieces of the projectile are sheared away, helping to form a sharpened chisel point at the head of the penetrator," said Sordelet. "The metallic glass and tungsten are environmentally benign and eliminate health worries related to toxicity and perceived radiation concerns regarding depleted uranium."

Depleted-uranium-based alloys have traditionally been used in the production of solid metal, armor-piercing projectiles known as kinetic energy penetrators, or KEPs. The combination of high density (~18.6 grams per cubic centimeter) and strength make depleted uranium, DU, ideal for ballistics applications. Moreover, DU is particularly well-suited for KEPs because its complex crystal structure promotes what scientists call shear localization or shear banding when plastically deformed. In other words, when DU penetrators hit a target at very high speeds, they deform in a "self-sharpening" behavior.

"It's very desirable to have this type of behavior together with high density, so that's why DU is used, but there has been strong global interest in replacing it since the start of the Gulf War in 1991." said Sordelet.

A popular replacement for DU is tungsten because at 19.3 grams per cubic centimeter, it's a little bit denser than DU. However, tungsten has a very simple crystal structure known as a body-centered cubic structure. "If I made the same solid projectile out of tungsten and plastically deformed it, I'd get a mushroom shape at the impacting face when the projectile hit the target because tungsten is notoriously resistant to forming shear bands," explained Sordelet. "It can be compared to taking a Tootsie Roll and pushing it against something flat and hard -- you get this mushroom-head effect."

Sordelet said that researchers have been looking at ways to utilize tungsten for at least the last 15 years. They've created tungsten heavy alloys, for example, W-Fe-Ni (tungsten-iron-nickel), in the hope of forming shear bands during high-rate deformation, but that goal hasn't been adequately achieved yet. "There are several types of tungsten-based penetrators, but they don't perform as well as DU," he said.

In the last few years, Sordelet said research has focused on mixing tungsten with bulk metallic glasses because glass, as a consequence of not having ordered planes of atoms, is naturally very susceptible to shear banding. "The problem is no one has come up with an economically viable metallic glass that has a sufficiently high density to form a composite that can compete with DU," he said. "People have made all kinds of different, interesting structures, but they all have coarse-grain tungsten of a micron or above in them, and that leads back to this mushroom-head effect."

Sordelet said the ideal approach would be to make the whole penetrator from a metallic glass matrix composite reinforced with nanocrystalline tungsten because researchers from the Johns Hopkins University and the Army Research Laboratory have recently demonstrated that when the grain size of tungsten is reduced to the nanometer scale, it's propensity to shear localize is significantly increased. So Sordelet and his Ames Laboratory co-workers, Ryan Ott, Min Ha Lee and Doug Guyer, decided to use a mechanical milling approach to reduce the grain size of coarse-grain tungsten and intimately blend it on a submicron scale with a metallic glass.

"We first physically blend the two powders in a tumbler and then mechanically mill the mixture to synthesize composite particles," explained Sordelet. According to him, the composite particles are composed of alternating nanoscale layers of tungsten and metallic glass that have an uncanny resemblance to fudge-ripple ice cream. "What was amazing to us was that in forming the composite powder structure with this nanolayering, nothing has changed in the two different layers," he said. "The metals do not blend together -- no alloying is going on between the two, and the metallic glass structure remains unchanged. The layer spacings and grain structures are just remarkably small."

In tests at low strain rates (low rates of deformation), Sordelet's nanostructured metallic glass+tungsten composite shows susceptibility to shear localization. "The fact that this occurred at low strain rates is very remarkable," said Sordelet. "It's extremely suggestive that you would see it at dynamic deformation rates, as well, which is what's needed for KEPs."

Sordelet is optimistic about the potential for the nanostructured metallic glass+tungsten composites not only for KEPs but also as an initial step in the development of similar composites for high-precision machining of advanced materials. But because the density of typical metallic glasses is fairly low, he knows they must get about 70 volume percent of tungsten into the composite, which will make it challenging to extrude in order to achieve a composite density that is acceptable to his colleagues at the Army Research Laboratory.

Contemplating that problem, Sordelet wonders, "What if we replace the glass with something that has a higher density and still might have a susceptibility to shear localization? The metallic glass is just a material that's along for the ride because of its strong propensity for shear localization," he noted. "But work at the Army Research Lab and Johns Hopkins University has shown that a lot of body-centered cubic metals have a susceptibility to shear localization if you get the grain size small enough." That being the case, Sordelet is now looking at a blend of tungsten and other high-density metals, but that's another story.

Source: Ames Laboratory

Related stories:

Job-Related Stress: NIST Demonstrates Fatigue Effects in Silicon
Researchers at the National Institute of Standards and Technology have demonstrated a mechanical fatigue process that eventually leads to cracks and breakdown in bulk silicon crystals—a phenomenon that’s particularly interesting because it long has been thought not to exist. Their recently published results have important implications for the design of new silicon-based micro-electromechanical system (MEMS) devices that have been proposed for a wide variety of uses.
Crystals on meteorite hold a key to understanding building blocks of planets
A University of Toronto-led study has uncovered tiny zircon crystals in a meteorite originating from Vesta (a large asteroid between Mars and Jupiter), shedding light on the formation of planetesimals, small astronomical objects that form the basis of planets.
Record efficiency photon detectors for quantum cryptography
Sensors that detect and count single photons, the smallest quantities of light, with 88 percent efficiency have been demonstrated by physicists at the National Institute of Standard and Technology (NIST). This record efficiency is an important step toward making reliable single photon detectors for use in practical quantum cryptography systems, the most secure method known for ensuring the privacy of a communications channel.
Researcher describes new type of strong, lightweight metallic material
A new type of laminate performed spectacularly in depth-of-penetration ballistics tests, but its greatest potential may derive from its ability to be tailored to meet specific engineering requirements

An engineering professor at the University of California, San Diego has described in the March issue of JOM (the Journal of the Minerals, Metals and Materials Society) the unique properties of a new type of metallic laminate that can serve as armor and as a replacement for beryllium, a strong but toxic metal commonly used in demanding aerospace applications.
Scientists Formulate Intelligent Glass That Blocks Heat Not Light
Soaring air conditioning bills or suffering in the sweltering heat could soon be a thing of the past, thanks to UCL chemists.

Reporting in the Journal of Materials Chemistry, researchers reveal they have developed an intelligent window coating that, when applied to the glass of buildings or cars, reflects the sun’s heat so you don’t get too hot under the collar.
Flexible OLEDs could be part of lighting's future
(AP) -- On a bank of the Mohawk River, a windowless industrial building of corrugated steel hides something that could make floor lamps, bedside lamps, wall sconces and nearly every other household lamp obsolete. It's a machine that prints lights.
New Ways to Use Biomass
(PhysOrg.com) -- Alternatives to fossil fuels and natural gas as carbon sources and fuel are in demand. Biomass could play a more significant part in the future. Researchers in the USA and China have now developed a new catalyst that directly converts cellulose, the most common form of biomass, into ethylene glycol, an important intermediate product for chemical industry. As reported in the journal Angewandte Chemie, the catalyst is made of tungsten carbide and nickel on a carbon support.
Carbon Nanotube-Coated Electrodes Improve Brain Readouts
A research group has significantly improved the quality of brain-function measurements by coating metal neural electrodes with carbon nanotubes. Their work could potentially allow scientists to learn more about brain diseases that are based on electrical impulse malfunctions, such as Parkinson's and epilepsy.

News discussion:

Why read past the BS first sentence? in Nanotechnology news