UMC, a world leading semiconductor foundry, today announced the availability of the foundry industry's most advanced 0.18um embedded high voltage technology. This process targets the growing portable liquid crystal display (
LCD) market, and can supply the different voltages required for the gate driver, source driver, controller and 4um2 ultra dense SRAM cell resulting in a smaller footprint, one-chip solution. An additional non-volatile memory (NVM) feature, called Multiple Times Programmable (MTP) memory, can also be added to the process with the addition of just one extra mask step.
Joe Ko, Director of Customer Integration Engineering Division at UMC, said "UMC has consistently led in the introduction of both mainstream and specialty technologies to serve customers in a wide variety of market segments. We are continuing with our strong R & D efforts and are pleased to be the first foundry to provide 0.18um embedded high voltage technology."
The MTP memory feature allows customers to perform SRAM redundancy repair and fine tune each IC to ensure identical behavior throughout the wafer, potentially reducing overall cost and time to market. The MTP also gives customers the added flexibility to configure/reconfigure ICs for different applications since the NVM can be reprogrammed.
High voltage technology is a requirement for LCD products to turn on the transistors that are used to drive applications such as cell phone displays. UMCJ, UMC's affiliate foundry company in Japan, has been producing customer 0.18um 20V high voltage products since the beginning of the year.
The single chip solution allowed by UMC means that these products could be made with a smaller form factor. UMC expects pilot production of customer LCD chips using 0.18um 32 volt technology to begin by the end of 2004.
Note Concerning Forward-Looking Statements
Some of the statements in the foregoing announcement are forward looking within the meaning of the U.S. Federal Securities laws, including statements about future outsourcing, wafer capacity, technologies, business relationships and market conditions. Investors are cautioned that actual events and results could differ materially from these statements as a result of a variety of factors, including conditions in the overall semiconductor market and economy; acceptance and demand for products; and technological and development risks.
Source: UMC
Related stories:
UMC, ARM Partner to Deliver Comprehensive SOI Solutions for 65nm Technology
UMC and ARM today announced that a test chip built with ARM SOI (Silicon On Insulator) libraries was taped-out successfully on UMC's 65-nanometer (nm) SOI process. The test chip consists of a set of ARM physical IP that uses a standard cell library, an I/O library and a single-port SRAM memory compiler. This tape-out at UMC represents the next step towards mainstream adoption of nanometer SOI technology for improved speed and power in complex system on chips (SOCs).
UMC Produces Working 45-nanometer ICs
UMC, a leading global semiconductor foundry, today announced that it has successfully produced functional 45-nanometer SRAM chips that feature an impressive bit cell size of less than 0.25um2. The ICs, produced using UMC's independently developed logic process, used sophisticated immersion lithography for its 12 critical layers and incorporated the latest technology advancements such as ultra shallow junction, mobility enhancement techniques, and ultra low-k dielectrics (k=2.5).
UMC Fabricates Record-Setting Voltage-Controlled Oscillator Using CMOS Technology
Chip designed by the University of Florida achieves 105-GHz Operating Frequency
UMC, a world leading semiconductor foundry, today announced it has fabricated a Voltage-Controlled Oscillator (VCO) with a record-setting fundamental operating frequency of 105-GHz using its 0.13um RFCMOS process technology. The chip was developed by the Silicon Microwave Integrated Circuits and Systems Research Group (SIMICS), Department of Electrical and Computer Engineering at the University of Florida, Gainesville.
UMC's Researchers Extend Traditional Nitrided Gate-oxide to beyond the 65nm node
Nitrogen profile engineering used to downscale effective oxide thickness towards 1nm to improve semiconductor performance
UMC, a world leading semiconductor foundry, today announced that its research and development team has achieved a significant engineering milestone by shrinking the Equivalent Oxide Thickness (EOT) of nitrogen doped silicon oxide (Oxy-nitride, SiON) gate dielectrics to approximately 1.0 nm using a new nitrogen profile engineering technique. This accomplishment allows more aggressive scaling of transistors to enhance overall semiconductor performance without the introduction of new materials.
Cadence and Faraday Announce Library Collaboration for Nanometer Design
Cadence Design Systems, Inc. and Faraday Technology Corporation today announced that Faraday has joined the OpenChoice intellectual property (IP) program to co-develop with Cadence an extensive list of library views. The libraries are being designed to facilitate digital implementation and signal integrity (SI) under UMC's 130-nanometer Fusion process.
UMC Expands X Architecture Support - First Pure-Play Foundry to Provide Qualified 90-nm Design Rules
Foundry Fabrication Now Available for Fabless Customers Designing 90-nm X Architecture Chips
The X Initiative and UMC, a world leading semiconductor foundry, today announced that UMC is the first pure-play foundry to release qualified design rules for X Architecture-based chip designs at the 90-nanometer process node. UMC is now ready to accept X Architecture designs from fabless semiconductor companies and its integrated device manufacturers (IDM) partners for fabrication at the 90-nanometer process node.
Xilinx Ships One Million Spartan-3 FPGAs - Delivers PLD Industry's First 90nm Family In High Volume
Xilinx, Inc. today announced it has shipped one million 90nm Spartan-3 devices - executing on delivery of the world's first 90nm FPGA family. Xilinx leads the PLD industry by more than a year on 90nm process technology with manufacturing partner UMC. Xilinx also announced on September 13, 2004, the immediate availability of the company's second
90nm product-line the Virtex-4 multi-platform FPGA family. Xilinx leveraged the 90nm expertise acquired through Spartan-3 volume production to accelerate its deployment of the Virtex-4 platform
FPGA family on proven 90nm technology.
UMC Expands Embedded Memory Portfolio to Target Fast Growing Smart Card Market
Foundry's first 0.25um embedded EEPROM delivers reliability and low power advantages
UMC, a world leading semiconductor foundry, today announced that it has developed the foundry's first true embedded EEPROM based on UMC 0.25um Logic and Mixed-signal Platform. The embedded EEPROM (Electrically Erasable Programmable Read-only Memory) targets the rapidly emerging
IC card market, which includes mobile SIM cards, debit cards, credit cards, ID cards, USB ID keys or any other application where secure identification is required and information needs to be updated and programmed frequently.