Successful firing of Vega’s first-stage motor in Kourou

The P80 motor - which will power the first stage of ESA’s Vega launch vehicle - delivered a mean thrust of about 190 tonnes for over 100 seconds, representing roughly one third of the thrust delivered by each of Ariane 5’s solid booster stages (EAPs). A peak of 250 tonnes was reached 7 seconds into the test.

“The first data we have at hand show that the firing closely followed the predicted pressure curve” said Antonio, Fabrizi, ESA’s Director of Launchers. “ This event concludes the first set of development tests conducted for the Vega launcher in 2006, a very intensive and successful year for the Programme. This excellent result marks a milestone that contributes significantly to further increasing confidence in the Vega launcher, the exploitation of which is currently being prepared by Arianespace following the signature of a Convention with ESA in November this year.”

“Among the various features of the P80 programme, beyond the technical achievements and the innovation involved, it is important to underline the remarkable contribution in terms of industrial investment, made possible by the expectations of a successful exploitation of the Vega launcher,” added Fabrizi.

More than 600 parameters were recorded in the course of the firing test to check that the many new technologies introduced in this motor performed as intended.

Based on the industrial capability acquired with the three-segment Solid Rocket Motor powering Ariane 5’s EAP and about the size of one of their lower segments, the P80 motor features many new developments which might later be used on Europe’s workhorse heavy launcher to improve its performance in terms of capabilities and cost.

A technology demonstrator

About 12 m high and 3 m in diameter, the P80 motor is loaded with 88 tons of solid propellant. Unlike previous motors of this size or larger developed in Europe or in the rest of the world, it is made of a single propellant segment instead of several segments cast separately before being assembled together.

Taking advantage of its common dimensions, the propellant casting was carried out at the Guiana Propellant Plant (UPG) in Kourou, in the same pit as the 100-tonne lower segments of Ariane 5’s EAPs. However, instead of the EAP’s stainless steel outer structure, P80 has a lightweight filament-wound composite casing. It also incorporates a newly simplified design of igniter with a carbon fibre structure.

A new composite steerable nozzle was developed, with a simplified architecture made of fewer elements to reduce production costs. It also includes complex-formed cast metal parts and a new thermal insulation material. The nozzle joint was made more flexible than on previous models to facilitate thrust vector control through electromechanical actuators. This is an additional technology improvement on a motor of that size, as they usually rely on a more complex hydraulic system.

“As expected, the P80 withstood high combustion pressure, of above 80 bars,” commented Stefano Bianchi, Vega Programme manager at ESA. “Despite this highly demanding environment, it apparently performed perfectly, although we’ll need some more time to fully analyse the vast amount of data we have just collected.”

Today’s test was performed on the solid booster test stand (BEAP) in Kourou, the same facility used for firing tests on Ariane 5’s EAPs. The motor will now be disassembled for detailed analysis. Some of its parts, such as the nozzle, will be returned to Europe.

New step towards Vega

The P80 is developed both as Vega’s first stage and as a technology demonstrator under a specific ESA programme managed by an integrated project team led by CNES, the French space agency, with an industrial team led by the French-Italian joint-venture Europropulsion, under delegation from Avio SpA of Italy. Among the main industrial subcontractors involved in the P80 are SABCA of Belgium (thrust vector control system), Snecma Propulsion Solide of France (nozzle) and APP of the Netherlands (igniter).

This was the first of two firings for the P80. A second test is tentatively planned by mid 2007. Additional test firings of the Zefiro 23 and then the Zefiro 9 motors – which will power Vega’s second and third stages - are also scheduled in 2007. This P80 firing test is a major achievement for the Vega Programme, as well as for solid propulsion capability in Europe and completes the series of major Vega milestones planned and completed in 2006. This demonstrates the programme maturity and allows to perform the final consolidation of the planning for the remaining activities, clearing the way to the Vega maiden flight in 2008.

ESA’s Vega small satellite launcher is an all-solid three-stage vehicle with a liquid-fuelled injection module, developed with the support of seven ESA Member States (Italy, France, Belgium, Switzerland, Spain, the Netherlands and Sweden). ELV SpA, a joint venture of Avio SpA and ASI, the Italian Space Agency, was delegated the responsibility for Vega launcher development.

Vega is designed to lift single or multiple payloads to orbits of up to 1,500 km in altitude. Its baseline payload capability is about 1,500 kg to a circular 700-km-high sun-synchronous orbit but it can also loft satellites ranging from 300 kg to more than 2 tonnes, as well as piggybacking microsatellites. This range of performance covers the needs for multiple applications in the fields of remote sensing, environmental monitoring, Earth science, space science, fundamental science and research and technology for future space applications and systems. Once qualified, Vega will be marketed and operated by Arianespace at the Guiana Space Centre , as a complement to Ariane 5 and Soyuz, and will address the small to mid-sized satellite launch market.

Source: ESA

Successful qualification firing test for Zefiro 23
On 27 March 2008, the second stage motor for Vega - Europe's new small launcher - successfully completed a static firing test at the Salto Di Quirra Inter-force Test Range in Sardinia, Italy.
Vega main engine test in Kourou
A prototype of the P80 rocket motor, which will power the first stage of ESA's new small launcher - Vega, was successfully tested on 4 December at the Guiana Space Centre, Europe's Spaceport in Kourou, French Guiana. Ignition occurred at 12:35 local time (15:35 UTC/GMT).
Vega upper composite passes tests at ESTEC
The upper composite of ESA's new small launcher has passed its vibration tests at ESA's European Space Research and Technology Centre (ESTEC) with flying colours. Vega's components are built and tested at various locations across Europe. The first launch is planned for the end of 2007 from Europe's Spaceport in Kourou, French Guiana.

Vega's second stage motor roars to life
ESA's Vega small satellite launch vehicle has made a new step toward its maiden flight, late next year, with the success of the first firing test on its second stage motor, the Zefiro 23.
Vega on track to meet 2007 deadline
There are just under three years to go to the first launch of a new European launcher - Vega. Last week representatives of over 20 European space industries met at ESA’s European Space Research Institute, ESRIN, just outside Rome in Italy, to discuss progress on this new small-scale launcher.
ESA rocket motor successfully tested
The first firing test of the European Space Agency's Vega Zefiro 9 third-stage solid rocket motor was successful, ESA officials in Paris said Wednesday.
Ancient Mexican maize varieties
Maize was first domesticated in the highlands of Mexico about 10,000 years ago and is now one of the most important crop plants in the world. It is a member of the grass family, which also hosts the world's other major crops including rice, wheat, barley, sorghum, and sugar cane. As early agriculturalists selected plants with desirable traits, they were also selecting genes important for transforming a wild grass into a food plant. Since that time, Mexican farmers have created thousands of varieties suitable for cultivation in the numerous environments in the Mexican landscape—from dry, temperate highlands to moist, tropical lowlands. Because of its importance as food, the need to improve yield, and the challenges presented by changing climate, the maize genome of the B73 cultivar is being sequenced. However, because maize has a complex genome and many varieties, the genome sequence from just one variety will not be adequate to represent the diversity of maize worldwide. Mexican scientists are also sequencing and analyzing the genomes of the ancient landraces to recapture the full genetic diversity of this complex and adaptable crop.
3 sequencing companies join 1000 Genomes Project
Leaders of the 1000 Genomes Project announced today that three firms that have pioneered development of new sequencing technologies have joined the international effort to build the most detailed map to date of human genetic variation as a tool for medical research. The new participants are: 454 Life Sciences, a Roche company, Branford, Conn.; Applied Biosystems, an Applera Corp. business, Foster City, Calif.; and Illumina Inc., San Diego.

Successful firing of Vega’s first-stage motor in Kourou

Related stories:

News discussion: