For Clean Water: Chlorine-tolerant membranes for desalination

(PhysOrg.com) -- One of the most pressing needs of our time is safe, sustainable access to fresh water. The dominant technology for desalination of water is membrane-based desalination, an energy-efficient, environmentally friendly process. Scientists have now developed a new membrane material that, unlike current polyamide membranes, tolerates chlorinated water.

A team headed by Ho Bum Park (University of Ulsan, South Korea), Benny D. Freeman (University of Texas at Austin, USA), and James E. McGrath (Virginia Polytechnic Institute, Blacksburg, USA) reported in the journal Angewandte Chemie on a membrane that is made of sulfonated copolymers.

Chlorine is the most commonly used biocide in water treatment because it is both inexpensive and very effective in small amounts. The disinfection of water headed into membrane-based desalination facilities is crucial to hinder the growth of biofilms, which reduce efficiency.

Polyamide membranes do not tolerate chlorine. This means that the water must first be treated with chlorine, and then the chlorine must be removed before the water comes into contact with the membrane. Before being fed into the supply network, the water must be chlorinated again. This is a complex, costly procedure.

Membranes made of polysulfone, a sulfur-containing engineering thermoplastic, are being considered as an alternative. They are highly tolerant to chlorine. However, polysufones are hydrophobic and do not allow enough water to pass through them. By attaching additional charged sulfonic acid groups, the researchers hoped to make the polymer more water friendly without affecting its other valuable properties.

Whereas previous efforts focused on modification of the polysulfone after polymerization, the team now took a different route: the simultaneous polymerization of disulfonated monomers (a building block containing two hydrophilic sulfonic acid groups) and another type of monomer led to the formation of a copolymer.

Undesired side-reactions, cross-linking or breaks in the polymer chains do not occur by this method. Most importantly, it is possible to precisely control how many water-friendly, charged sulfonic acid groups are in the polymer chain. This allows the targeted generation of chlorine-resistant membranes whose permeability for water and salts can be tailored to specific applications (e.g., nanofiltration, reverse osmosis).

Citation: Benny D. Freeman, Highly Chlorine-Tolerant Polymers for Desalination, Angewandte Chemie International Edition 2007, 46, No. 32, 6019–6024, doi: 10.1002/anie.200800454

Provided by Angewandte Chemie

Related stories:

New chlorine-tolerant, desalination membrane hopes to boost access to clean water
A chemical engineering professor at The University of Texas at Austin is part of a team that has developed a chlorine-tolerant membrane that should simplify the water desalination process, increasing access to fresh water and possibly reducing greenhouse gases.
'Fingerprinting' method tracks mercury emissions from coal
(PhysOrg.com) -- University of Michigan researchers have developed a new tool that uses natural "fingerprints" in coal to track down sources of mercury polluting the environment. The research is published in today's online issue of the journal Environmental Science & Technology.
Water purification down the nanotubes
Nanotechnology could be the answer to ensuring a safe supply of drinking water for regions of the world stricken by periodic drought or where water contamination is rife. Writing in the International Journal of Nuclear Desalination, researchers in India explain how carbon nanotubes could replace conventional materials in water-purification systems.
Saltwater solution to save crops
Technology under development at the University of New South Wales could offer new hope to farmers in drought-affected and marginal areas by enabling crops to grow using salty groundwater.
Scientists use bacteria to pinpoint chloride toxins
Scientists have studied the sensor with which bacteria detect chloride compounds, many of which can be carcinogenic or dangerous to the environment, and now hope to speed up identification of these dangerous toxins from weeks to just a few hours.
Dr David Leys at the University of Manchester’s Faculty of Life Sciences has won a prestigious European Research Council (ERC) starting grant to further understand this process and to develop a biosensor that will alert us to contamination in environmental or foodstuff samples quickly.
Orienting Flow in Carbon Nanotubes
(PhysOrg.com) -- Carbon nanotubes provide some of the most interesting possibilities for future technology. One of the more intriguing possibilities – with a variety of practical applications – is using carbon nanotubes for water transport. In the past, experiments have suggested that extremely fast water transport can be attained through carbon nanotubes as small as two nanometers in diameter by applying a pressure gradient.
It's The Water: Beijing Olympic Swimmer Provided State-of-Art ProMinent Ozone Technology
(PhysOrg.com) -- As Olympic records are being broken left and right by Michael Phelps, questions have been raised do we have a performance enhancing water issue. Some attribute the gold hanging around Olympiad Phelps is the result of a Superman fabric developed by Speedo. In fact, aside from a truly phenomenal performances by the swimmers, it could be the water. ProMinent, the brainchild of Professor h.c. Viktor Dulger in Heidelberg developed the first electronic solenoid driven dosing pump known as the Ozone Technology system for sanitizing pools in 1971. The system does not rely on chlorine which is viewed as harmful to swimmer's lungs, eyes and may cause skin rashes. ProMinent is a leader world-wide with operations in China, Germany, Hungary and South America.
Moon water discovered: Dampens Moon-formation theory
Using new techniques, scientists have discovered for the first time that tiny beads of volcanic glasses collected from two Apollo missions to the Moon contain water. The researchers found that, contrary to previous thought, water was not entirely vaporized in the violent events that formed the Moon. The new study suggests that the water came from the Moon's interior and was delivered to the surface via volcanic eruptions over 3 billion years ago. The finding calls into question some critical aspects of the "giant impact" theory of the Moon's formation and may have implications for the origin of possible water reservoirs at the Moon's poles. The research is published in the July 10, 2008, issue of Nature.

News discussion:

General Science news