Engineers study whether 'light on a wire' is wave of future for circuitry

If data drove itself around in cars, photonics would be a roomy minivan and electronics would be a nimble coupe. Photonic components such as fiber optic cables can carry a lot of data but are bulky compared to electronic circuits. Electronic components such as wires and transistors carry less data but can be incredibly small.
A problem holding back the progress of computing is that with mismatched capacities and sizes, the two technologies are hard to combine in a circuit. Researchers can cobble them together, but a single technology that has the capacity of photonics and the smallness of electronics would be the best bridge of all. A new research group in Stanford's School of Engineering is pioneering just such a technology—plasmonics.

Surface plasmons are density waves of electrons—picture bunches of electrons passing a point regularly—along the surface of a metal. Plasmons have the same frequencies and electromagnetic fields as light, but their sub-wavelength size means they take up less space. Plasmonics, then, is the technology of transmitting these light-like waves along nanoscale wires.

"With every wave you can in principle carry information," says Mark Brongersma, assistant professor of materials science and engineering and head of the new plasmonics Multidisciplinary University Research Initiative (MURI), which earlier this month received an additional $300,000 round of funding from the Air Force Office of Sponsored Research (AFOSR). "Plasmon waves are interesting because they are at optical frequencies. The higher the frequency of the wave, the more information you can transport." Optical frequencies are about 100,000 times greater than the frequency of today's electronic microprocessors.

The research is a prime example of work at the forefront of two strategic initiatives of the School of Engineering: information technology and photonics, and nanoscience and nanotechnology. The school's other two initiatives are in bioengineering, and environment and energy.

Making plasmons work

Supported by a $2.3 million grant received last October from the AFOSR, the goal of the MURI is to demonstrate plasmonics in action on a standard silicon chip. Brongersma and about 20 MURI partners, including David A. B. Miller, the W. M. Keck Foundation Professor of Electrical Engineering, and electrical engineering Assistant Professor Shanhui Fan, have made working plasmonic components and have had their first journal article accepted for publication in an upcoming issue of Optics Letters. The next step will be to integrate the components with an electronic chip to demonstrate plasmonic data generation, transport and detection. A success would be the first of its kind anywhere.

Plasmons are generated when, under the right conditions, light strikes a metal. The electric field of the light jiggles the electrons in the metal to the light's frequency, setting off density waves of electrons. The process is analogous to how the vibrations of the larynx jiggle molecules in the air into density waves experienced as sound.

Plasmon waves behave on metals much like light waves behave in glass, meaning that plasmonic engineers can employ all the same ingenious tricks—such as multiplexing, or sending multiple waves—that photonic engineers use to cram more data down a cable.

Meanwhile, because plasmonic components can be crafted from the same materials chipmakers use today, Stanford engineers are hopeful they can make all the devices needed to route light around a processor or other kind of chip. These would include plasmon sources, detectors and wires, which the lab already has made, as well as splitters and even transistors.

While an all-plasmonic chip might be feasible someday, Brongersma expects that in the near term, plasmonic wires will act as high-traffic freeways on chips with otherwise conventional electronics. Local arrays of electronic transistors would carry out the switching necessary for computation, but when a lot of data needs an express lane to travel from one section of a chip to another, electronic bits could be converted to plasmon waves, sent along a plasmonic wire and converted back to electronic bits at their destination.

Barriers and frontiers

The potential of plasmonics right now is mainly limited by the fact that plasmons typically can travel only several millimeters before they peter out. Chips, meanwhile, are typically about a centimeter across, so plasmons can't yet go the whole distance.

The distance a plasmon can travel before dying out is a function of several aspects of the metal. But for optimal transfer through a wire of any metal, the surface of contact with surrounding materials must be as smooth as possible and the metal should not have impurities.

For most wavelengths of visible light, aluminum allows plasmons to travel farther than other metals such as gold, silver and copper. It is somewhat ironic that aluminum is the best metal to use because the semiconductor industry recently dumped aluminum in favor of copper—the better electrical conductor—as its wiring of choice. Of course, it may turn out that some kind of alloy will have even better plasmonic properties than either aluminum or copper.

Another classic semiconductor industry issue that MURI researchers will have to address is heat. Chipmakers are constantly battling to ensure that their electronic chips don't run too hot. Plasmonics also will likely generate some heat, but exactly how much is not yet known. Even if plasmonics run as hot as electronics, Brongersma points out, they will still have the advantage of having a higher data capacity in the same space.

Electronics face fundamental physical barriers to their data-carrying capacity, but the demands placed on them never seem to stop. "There is a great need for transporting more information around on chips," Brongersma says.

Source: Stanford University

Related stories:

Scientists Move Optical Computing Closer to Reality
(PhysOrg.com) -- Scientists at the University of Pennsylvania have theorized a way to increase the speed of pulses of light that bound across chains of tiny metal particles to well past the speed of light by altering the particle shape. Application of this theory would use nanosized metal chains as building blocks for novel optoelectronic and optical devices, which would operate at higher frequencies than conventional electronic circuits. Such devices could eventually find applications in the developing area of high-speed optical computing, in which protons and light replace electrons and transistors for greater performance.
New technique to compress light could open doors for optical communications
(PhysOrg.com) -- Scientists at the University of California, Berkeley, have devised a way to squeeze light into tighter spaces than ever thought possible, potentially opening doors to new technology in the fields of optical communications, miniature lasers and optical computers.
Chasing rainbows
Engineers working in optical communications bear more than a passing resemblance to dreamers chasing rainbows. They may not wish literally to capture all the colors of the spectrum, but they do seek to control the rate at which light from across the spectrum moves through optical circuits.
A step toward circuits for terahertz computing
University of Utah engineers took an early step toward building superfast computers that run on far-infrared light instead of electricity: They made the equivalent of wires that carried and bent this form of light, also known as terahertz radiation, which is the last unexploited portion of the electromagnetic spectrum.
Collaboration helps make JILA strontium atomic clock 'best in class'
A next-generation atomic clock that tops previous records for accuracy in clocks based on neutral atoms has been demonstrated by physicists at JILA, a joint institute of the Commerce Department's National Institute of Standards and Technology and the University of Colorado at Boulder. The new clock, based on thousands of strontium atoms trapped in grids of laser light, surpasses the accuracy of the current U.S. time standard based on a "fountain" of cesium atoms.
Understanding light at the nanoscale: a nano-sized double-slit experiment
Before nanotechnology can reach its full potential, researchers must understand the way things work on the nanoscale—which is often very different from the macroscopic world. One of these areas is light, and how light interacts with matter on tiny scales.
On a wire or in a fiber, a wave is a wave
In an experiment modeled on the classic “Young’s double slit experiment” and published in the journal Nature Nanotechnology, researchers have powerfully reinforced the understanding that surface plasmon polaritons (SPPs) move as waves and follow analogous rules. The demonstration reminds researchers and electronics designers that although SPPs move along a metal surface, rather than inside a wire or an optical fiber, they cannot magically overcome the size limitations of conventional optics.
Stretchable Silicon May Inspire a New Wave of Electronics
Scientists have created a form of nanoscale silicon that is stretchable. The new material may help pave the way for a class of stretchable electronic devices, such as “smart” surgical gloves and personal health monitors, that are not possible to create using current technology and materials.

News discussion:

Physics news