Advances in wireless biosensor technology

The Academy of Finland is funding the project, whose goal is to provide the more accurate prediction of changes in patient condition and, in turn, even save lives. "For example, a subcutaneous EKG monitor will be able to detect cardiac arrhythmia, and the data for this can then be transmitted wirelessly to the physician's mobile phone or PC," explains Lekkala.

At present patient health status is primarily monitored with supercutaneous sensors. However, wearable and, in particular, implantable, or subcutaneous, biosensors will provide significant advantages over more conventional methods. The biggest problem with conventional measuring systems is poor skin sensor contact. In subcutaneous measuring systems the sensor-to-body contact is more stable. Furthermore, external electrical interference of the measurement signal is reduced, which improves the measurement result. Health care costs are saved, when monitoring is not time and place-dependent: patients will no longer have to make an appointment with the physician for a consultation or tests. Patients under remote supervision can continue living their normal lives for a longer period of time.

This new technology also makes possible measurements and long-term monitoring, which would be practically impossible using existing technologies. For example, the condition of a prosthetic hip joint can now only be monitored using expensive x-ray imaging-based methods.

Subcutaneous biosensors must not cause problems for the patient

The Wireless research project is also producing new data on the design of subcutaneous biosensors. These should be as small as possible. The integration of electronics and development of packaging technologies make it possible to manufacture sensors and electronics on a silicon chip no bigger than a fingernail. Due to its light weight and small size several of these types of chips can be implanted in a sizable area. The sensors might also contain various microsensors, measurement electronics and wireless communication circuits.

In addition to the small size, the packaging is also challenged by the environment into which it is placed. The Wireless research project is developing sensors and technologies which pose no risk to the patient's health. "The work is extremely challenging, because the electronics have to work reliably for long periods of time under the skin, in a moist, corrosive environment, and they must not pose any health hazards, even if the protective coating were to be damaged for some reason," explains Lekkala.

Advances in biomaterial technologies allow the biocompatible coatings of sensors to be customised for each application. It is even possible to incorporate functional elements, such as by enhancing the implant coating with a layer that releases antibiotics. Sensors should also be flexible, so that they can follow the patient's movements. This requires that the sensor circuit boards are flexible and its components are thin enough to bend with the circuit board. A silicon chip reduced to a thickness of less than 0.1 millimetre will be flexible. When this flexible package is coated with a thin, protective and biocompatible material, the entire unit will effectively flex with and withstand the patient's movements while implanted.

Wireless combines electronics, biomaterials and health research

The Wireless research project exploits the know-how of experts from five different fields. In Finland this pioneering group unites experts in physiological modelling, biomaterial technologies, biosensors, wireless communications and electronics packaging technologies. The sensors, which are being developed in Tampere, are expected to be used in major medical, social and commercial application. The project is part of the Academy of Finland Future Electronics (TULE) Research Programme.

Source: Academy of Finland

Home IQ: Winning technologies will make people smarter -- not their houses
Someday, we may be getting fashion advice from our mirrors. Instead of digging through our closets to find the perfect complement for a new shirt, we may hold it up to our bedroom mirror for a computer to scan. Using radio-frequency identification technology, our electronic fashion stylist will then offer suggestions based on what's in our closet or how the latest edition of Vogue or Teen Beat pairs up something similar.
Research aims to put tongues in control of devices
(AP) -- The tireless tongue already controls taste and speech, helps kiss and swallow and fights germs. Now scientists hope to add one more ability to the mouthy muscle, and turn it into a computer control pad.
Networks of the Future: Extending Our Senses into the Physical World
(PhysOrg.com) -- The picture of a future with wireless sensor networks-webs of sensory devices that function without a central infrastructure--is quickly coming into sharper focus through the work of Los Alamos National Laboratory computer scientist Sami Ayyorgun.
Vehicle communications system in your pocket
The device that will manage the telematics communications of next-generation vehicles may already be in our pockets. Multiple application ‘nomadic’ devices like the mobile phone are ideal for telematics solutions. Automotive manufacturers are now facing up to that reality. It hasn’t been easy.
Team develops energy-efficient microchip
Researchers at MIT and Texas Instruments have unveiled a new chip design for portable electronics that can be up to 10 times more energy-efficient than present technology. The design could lead to cell phones, implantable medical devices and sensors that last far longer when running from a battery.
Swedish researchers first with integrated receiver for high frequency applications
As the first research group in the world, researchers at Chalmers have succeeded in combining a receiver for high frequencies with an antenna on a small chip.
Purdue creating wireless sensors to monitor bearings in jet engines
Researchers at Purdue University, working with the U.S. Air Force, have developed tiny wireless sensors resilient enough to survive the harsh conditions inside jet engines to detect when critical bearings are close to failing and prevent breakdowns.
Purdue creating wireless sensors to monitor bearings in jet engines
Researchers at Purdue University, working with the U.S. Air Force, have developed tiny wireless sensors resilient enough to survive the harsh conditions inside jet engines to detect when critical bearings are close to failing and prevent breakdowns.

Advances in wireless biosensor technology

Related stories:

News discussion: