Morphologies of porous molybdenum disulfide prepared by researchers show good performance in hydrogenation of phenol

Morphologies of porous MoS2 show good performance in hydrogenation of phenol
A schematic illustration of the preparation process for porous MoS2, via the following steps: APTES was added to the aforementioned silica gel, and thiourea or L-cysteine as the sulfur source was added to the above solution. ammonium molybdate was dissolved in water and poured into the silica gel. The gel was poured into a stainless steel autoclave and hydrothermally treated to obtain a black gel. The product was placed into HF solution and stirred to etch away the SiO2 templates to obtain porous MoS2. Credit: Zhenwei Zhang

Molybdenum disulfide (MoS2) is a transition metal chalcogenide material widely used in photocatalysis, synthesis catalyst, hydrodesulfurization, hydrodeoxygenation, electronic, optical, mechanical, even in hydrogen evolution reaction (HER). The morphology-controlled preparation of MoS2 is currently highly topical. Many preparation routes have been developed for synthesis of nanometer MoS2 over the last decades, and MoS2 nano-materials with different morphologies, particle sizes, and porous features can be obtained from different raw materials through different pathways. However, the morphology and crystal size of MoS2 was uncontrolled and the properties of the obtained material were variable.

The template is an efficient means of synthesizing high specific surface area MoS2, and includes the soft template method and hard template method. Soft templates mainly include polymers and surfactants, MoS2 prepared through this method has no mesopores, a low surface area, and it is difficult to remove the template. Using hard templates to prepare MoS2 species have a wide distribution. Based on the aforementioned considerations, Amino groups can coordinate well with molybdenum to assemble a long-range super-molecular system; it can prepare MoS2 nanoparticles with a high specific surface area, having a controllable pore size and continuous porous morphology.

Researchers prepared porous MoS2 with different morphologies and a high specific area through the use of an aminopropyltriethoxysilane (APTES)-modified SiO2 hard template and different sulfur sources, i.e., thiourea or L-cysteine, which lead to form two different morphology.

Declining fossil fuel resources and the increased demand for petroleum continue to drive researchers to find new energy sources. Bio-oil is an ideal liquid fuel, but requires consecutive processes. Hydrodeoxygenation (HDO) is the most common route for upgrading bio-oil, and MoS2 catalysts produced using methods detailed in this research have shown excellent performance in the HDO reaction.

More information: Zhenwi Zhang et al, Fabrication of Porous MoS2 with Controllable Morphology and Specific Surface Area for Hydrodeoxygenation, Nano (2017). DOI: 10.1142/S1793292017501168

Citation: Morphologies of porous molybdenum disulfide prepared by researchers show good performance in hydrogenation of phenol (2017, October 11) retrieved 28 March 2024 from https://phys.org/news/2017-10-morphologies-porous-mos2-good-hydrogenation.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Harnessingthe properties of a remarkable 2-D material

2 shares

Feedback to editors