A way to make batteries almost any shape desired

A way to make batteries almost any shape desired
Fabrication of Zn-PANI cell in arbitrary geometries. (a) Optical image of printed can and lid structures in different packaging shapes and sizes. (b) Schematic diagrams illustrating the integrated assembly process for a representative H-shaped Zn-PANI battery. (c) Optical images of assembled Zn-PANI batteries in ring-, H-, and cylindrical shapes. (d) Optical image of the spherical Zn-PANI battery showing the cell voltage. (e) Optical image of a LED operated by two H-shaped Zn-PANI batteries connected in serial. (f) Rate capability and (g) cycling performance of a cylindrical Zn-PANI battery measured within a voltage window of 0.7−1.7 V at different C rates. Credit: ACS Nano (2018). DOI: 10.1021/acsnano.8b02744

A team of researchers from Korea Advanced Institute of Science and Technology, Harvard University and Korea Research Institute of Chemical Technology has developed a way to make batteries in almost any shape that can be imagined. In their paper published in the journal ACS Nano, the researchers describe the process used to make the batteries and the device they created to prove the concept sound.

The shapes of many small devices are constrained by the limits of —smart watches, for example. Small batteries are typically coin-shaped, rectangular, cylindrical or pouch-shaped. The researchers with this new effort developed a new way to make a battery that could be almost any shape a product manufacturer could design.

The researchers report that they chose zinc-ion batteries because they can be used safely in the open air—this is because they make use of water-based electrolytes. They looked at manufacturing methods used for various products, searching for techniques to make battery components in different shapes. For the cathode, they found that allowed batteries to be cut into a desired shape. For some other parts, they used . For packaging, they used stereolithography. The were produced using a 3-D printer. They put all their ideas together and produced some batteries in the shape of letters, rings and circles.

To test their ideas, the researchers created a battery that could be used to power a light sensor affixed to a ring worn on the finger. By successfully demonstrating such a device, the team showed that their ideas were sound. They note that the same process could be used to create other novel devices, and that other options are also available, such as using zinc-manganese batteries to power a graphene supercapacitor.

The researchers also note that the designer batteries they created can be discharged very quickly—and can be fully charged in just a few minutes. They suggest their batteries could be used in such applications as implantable or wearable devices and other novel products.

More information: Chanhoon Kim et al. High-Power Aqueous Zinc-Ion Batteries for Customized Electronic Devices, ACS Nano (2018). DOI: 10.1021/acsnano.8b02744

Journal information: ACS Nano

© 2018 Science X Network

Citation: A way to make batteries almost any shape desired (2018, November 16) retrieved 28 March 2024 from https://phys.org/news/2018-11-batteries-desired.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

3D-printed lithium-ion batteries

185 shares

Feedback to editors